Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Los Altos, CA | Seaside Contractors
Our General Contractor in Los Altos provides independent, full-scope CGI work on exterior cladding, countertops, roofing accessories, and flooring systems, not as a manufacturer-authorized dealer. The one thing that makes our CGI work different in Los Altos is this: we sequence every job around the heritage coast live oak on your lot and the 1950s – 60s ranch foundation under it. If you’re planning a tear-down remodel, a kitchen re-skin, or a re-roof on one of the 94022, 94023, or 94024 lots, call (833) 589-8103 and we’ll walk the site together.
Why Los Altos Residents Choose Us for CGI Service
Most contractors in Los Altos know CGI as a name on a spec sheet. Our crew has spent years working with CGI material profiles and system tolerances on mature-lot infill construction, and that’s a different kind of familiarity. We understand how CGI exterior cladding and trim systems behave when they’re sealed tight against dry-summer dust and then asked to shed six months of rain. We know what happens to CGI quartz countertops when they’re set over an original 1950s cabinet run that’s drifted out of level over decades.
Glen Sorrento, our owner, grew up in the Shell Cove neighborhood of Foster City and studied building construction technology at College of San Mateo. He’s spent two-plus decades working through nearly every project type this part of the Peninsula produces, including the ranch re-skins and Eichler-influenced renovations that dominate Los Altos. We’re an independent CGI service in Stanford and the wider Peninsula. We source genuine CGI components where they exist. We use quality aftermarket fasteners, flashing, and substrates where OEM isn’t specified. The failure we see is almost always installation and substrate, not the product. And we back our work with our own craftsmanship, not a manufacturer badge.
Styles & brands we work with
Common CGI Construction Problems We Solve in Los Altos
- Cladding and trim joints that open up after dry summers. Los Altos summers pull moisture out of everything, including the substrate behind CGI cladding. Joints that were sealed tight in August wick water in November. We see bubbling, lifted caulk lines, and water-stained trim at the bottom of exterior walls. We strip the affected runs, re-flash the substrate, and re-clad before the rain window closes.
- CGI quartz countertop seams cracking over original 1950s cabinets. The original cabinet runs in Los Altos ranch homes have settled. Sometimes they’re out of level by a half-inch or more over eight feet. When CGI quartz is set over that without re-flashing the substrate, hairline cracks show up at seams and edge profiles within the first wet-dry cycle. We re-flash the cabinet deck before the stone goes down.
- Roofing accessory and flashing failures at penetrations. Shallow original roof pitches on 1950s – 60s ranches don’t shed water the way a modern 6:12 or steeper roof does. When a skylight or a vent pipe was added at some point, that penetration is where CGI flashing components fail first. Summer clay shrinkage shifts the deck. The flashing pulls. Water follows.
- Floor and tile installations telegraphing cracks over aging slabs. Los Altos sits on expansive clay. It swells in the rain season, shrinks in the dry months, and the shallow slabs or crawlspace foundations under original ranch homes flex with the movement. CGI tile and flooring lines installed without a proper uncoupling membrane will telegraph those cracks straight through the finish. We address the substrate before a single tile is set.
- Heritage coast live oaks dictating where the foundation can go. This is not a CGI product failure, but it becomes one if ignored. On many Los Altos lots, a protected coast live oak sits inside the drip line. Tree-protection review and root-zone fencing set our foundation and pier layout before the house design is finalized. If the CGI cladding, roofing, or substrate sequencing doesn’t bend around that protected root zone, the whole envelope fails early. Let’s figure out what the job actually needs, then we’ll talk materials.
CGI Service in Los Altos: What Local Conditions Mean for Your Equipment
Because so many Los Altos lots carry a heritage coast live oak inside the drip line, tree-protection review and root-zone fencing routinely set our foundation and pier layout before the house design is finalized. That means CGI cladding, roofing, and substrate sequencing has to bend around a protected root zone that sits exactly where the old ranch foundation line was. This is not true in Cupertino or our CGI service in Mountain View with the same intensity. In Los Altos, the tree comes first, the foundation second, and the finish materials third. On a ranch tear-down remodel near the Los Altos foothills, our tech found the original 1950s roof deck flexing at a skylight penetration after the summer clay pulled away from the shallow foundation, and the CGI flashing there had already wicking-stained the trim. We stripped to the deck, re-flashed the penetration with CGI accessories over a reinforced substrate, and re-clad the affected trim ahead of the rain season. The homeowner got a dry, properly sequenced envelope before the November – April window closed.
CGI Models & Products We Service in Los Altos
Our CGI sales & service work covers the full product range that shows up on Los Altos remodels: exterior cladding and trim systems used on ranch-home re-skins, quartz and solid-surface countertop lines specified in kitchen tear-out remodels, roofing underlayment and accessory systems on 1950s – 60s ranch re-roofs, and tile and flooring lines installed in Eichler-influenced tract renovations. For cladding, countertop, and roofing accessory systems, we source genuine CGI components where they exist. Where OEM isn’t specified, we use quality aftermarket fasteners, flashing, and substrates. If a CGI surface is sound but the underlayment or setting bed is compromised, we repair the substrate rather than default to full replacement. We tell you honestly when replacement is the better spend.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Los Altos
Pricing in Los Altos tracks the scope of the job and the condition of the substrate underneath. A straight countertop swap over a properly leveled cabinet run runs lower. A full kitchen remodel with CGI quartz, new cabinet decking, and re-flashed surfaces runs higher. Same with roofing: a small repair is one number; a full replacement with CGI accessories is another. Here are the ranges we work within for Los Altos:
| Service | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Countertop Installation | $2,000 – $6,500 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Remodel | $9,000 – $28,000 |
Every free estimate includes a site walk, a substrate inspection, and a written line-item quote. Call (833) 589-8103 to schedule one.
Serving Los Altos, CA — Our Local Coverage Area
We’re based in the Los Altos area and provide our Loyola CGI service to this community we know well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Los Altos
Yes. We’re an independent contractor, not authorized, sponsored, or endorsed by CGI. We source genuine CGI components and install them to manufacturer spec, but the workmanship warranty comes from us. Call (833) 589-8103 to talk through what your project needs.
Yes, often significantly. If the tree is within the drip line and subject to city tree-protection review, the root-zone fencing controls where foundations and piers can go. We sequence CGI cladding, roofing, and substrate work around that protected root zone. That means some areas get reinforced substrates or shifted pier layouts before any finish material goes in. Call (833) 589-8103 and we’ll check your lot’s specific constraints.
Between May and October, before the rain season starts. The November – April window is when framing, roofing, and foundation work gets hardest on Los Altos lots, and when water intrusion at open joints does the most damage. Schedule during the dry months to have the envelope closed before the rain arrives. Call (833) 589-8103 to get it on the calendar.
They can if the cabinet run has drifted out of level and the deck isn’t re-flashed before the quartz is set. Los Altos ranch homes from that era routinely have 1/4″ to 1/2″ of drift over an eight-foot run. We level and re-flash the substrate first. That’s the difference between a countertop that lasts twenty years and one that hairline-cracks in two. Call (833) 589-8103 for an exact quote, estimates are free.
It does. The expansive clay under Los Altos moves with the seasons, and a shallow slab flexes with it. CGI tile and flooring installed directly over that slab will telegraph cracks. We build in a proper uncoupling membrane or substructure first. That’s standard on every floor we set in Los Altos. Call (833) 589-8103 to talk through your project.
Service Areas Near Los Altos
We serve Los Altos and the surrounding communities across the Peninsula. For homes in the hills, see CGI service in Los Altos Hills. For properties a little further up the ridge, look at CGI service in Ladera. Our full reach is covered on the Los Altos service area page.
Book Your CGI Service in Los Altos Today
CGI work in Los Altos rewards planning ahead, especially with the rain season coming. Call (833) 589-8103 and we’ll schedule a site walk, inspect the substrate, and give you a written line-item estimate.
Written by Glen Sorrento, Owner at Seaside Contractors, serving Los Altos and the wider Peninsula.