Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in El Granada, CA | Seaside Contractors
We provide independent CGI construction service across El Granada, from cabinet installation and refacing to frameless glass shower enclosures and quartz countertops. The one thing that makes our CGI work here different is simple: we know which side of your house the salt air actually attacks. If you’re planning a kitchen or bath project with CGI materials in El Granada, call (833) 589-8103 for a free estimate that accounts for coastal conditions from the first measurement.
Why El Granada Residents Choose Us for CGI Service
Glen Sorrento, our owner, grew up on the San Mateo County coast and has spent more than two decades working through the specific ways salt air and wind-driven rain chew through cabinet hardware, shower fittings, and countertop edges. That matters when you’re choosing between CGI product lines, because the right call on a seaward-facing wall is often different from the right call on an inland wall. We’re an independent contractor, not a CGI dealer, which means our recommendations come from what actually holds up on Princeton Avenue or Avenue Alhambra, not from a manufacturer agreement. See our full CGI sales & service page for the scope of what we handle.
Styles & brands we work with
Common CGI Construction Problems We Solve in El Granada
- Corroded cabinet hinges on seaward walls. CGI cabinet hinge plates and drawer slides seize solid well before the cabinet box fails. In El Granada, the harbor exposure accelerates this on the windward side of the house while the inland side stays nearly new. We replace seized hardware with CGI OEM parts or marine-grade stainless equivalents.
- Delaminating thermofoil and painted door faces. Wind-driven rain wicks behind panel edges on windward elevations, causing blistering and edge delamination in CGI painted and thermofoil doors. This shows up first on the sides of cabinets facing the ocean, not on every door in the kitchen.
- Pitted shower glass hardware. CGI frameless glass shower clamps, hinges, and seal strips pit and stain fast in El Granada’s consistent humidity, especially in bathrooms without a strong exhaust fan. The glass itself is usually fine; the hardware is the failure point.
- Darkening quartz seams and sink edges. CGI quartz slabs near sinks darken and stain because fog-belt humidity keeps the substrate damp under the seam. Sealed rims and properly vented curbs matter more than any sealer you put on the slab face.
- Mismatched hardware from previous repairs. We often see kitchens where one section was repaired with generic zinc hardware that is already corroding while the original CGI parts hold up better. Matching the hardware grade to the wall exposure is the fix that lasts.
CGI Service in El Granada: What Local Conditions Mean for Your Equipment
Here’s the thing most CGI information pages won’t tell you about El Granada: the harbor and open-coast exposure means hardware on the seaward elevation corrodes noticeably faster than the exact same product a few miles inland at the same house age. We see it constantly in the 94018 flats near the harbor. A kitchen with two exterior walls will show seized CGI hinges and blistered door edges on the ocean-facing run while the inland wall cabinets are almost untouched. That specific pattern is the tell. It means you often do not need a full kitchen overhaul; you need a targeted rebuild of the windward wall with marine-grade hardware and sealed door edges. That one insight has saved El Granada homeowners thousands in unnecessary replacements.
CGI Models & Products We Service in El Granada
We install, repair, and reface CGI Euro-style full-overlay frameless cabinetry with soft-close concealed hinges, CGI shaker-profile painted and thermofoil door styles, CGI quartz countertop slabs with integrated sink aprons, and CGI frameless tempered-glass shower enclosures. For parts, we use CGI OEM replacement hinges, slides, and glass hardware where the original profile is still available. When OEM hardware is standard zinc and would just corrode again on a seaward wall, we specify stainless or marine-grade equivalents. We keep common CGI hinge profiles and shower hardware in stock for faster El Granada turnaround, and our El Granada service area coverage includes all of 94018.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in El Granada
What you pay depends on the wall exposure, the condition of the cabinet boxes, and whether you are refacing or replacing. A seaward-wall hardware swap on sound boxes runs far below a full redo. Here are the ranges we quote in El Granada:
| Service | Typical Range |
|---|---|
| Cabinet Installation & Refacing | $4,000 – $13,000 |
| Quartz & Granite Countertops | $2,000 – $6,500 |
| Frameless Glass Shower Enclosures | $4,500 – $12,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
Every free estimate includes a wall-by-wall look at your exposure so we can tell you which runs need marine-grade hardware and which can stay OEM. Call (833) 589-8103 to schedule yours.
Serving El Granada, CA — Our Local Coverage Area
We’re based in the El Granada area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in El Granada
Yes, and faster than the inland wall in the same kitchen. The harbor-driven salt air attacks zinc hinges and slides on the windward elevation first. The fix is marine-grade stainless hardware on that specific run, not necessarily the whole kitchen. Call (833) 589-8103 and we’ll tell you which walls are actually at risk.
If the cabinet boxes are sound, refacing with sealed door edges and a hardware upgrade handles it. If the boxes themselves are swollen or delaminating, replacement is the honest call. We’ll open a door or two and tell you straight. Call (833) 589-8103 for a free assessment.
Because fog-belt humidity keeps the substrate damp under the seam. Sealing the surface does not fix moisture trapped at the cut edge. The fix is a sealed sink rim and proper substrate ventilation. Call (833) 589-8103 and we’ll look at what is actually wicking moisture.
Usually, yes. The glass is rarely the problem. We replace the clamps, hinges, and seal strips with marine-grade hardware and the enclosure stays. Call (833) 589-8103 for an exact quote; estimates are free.
El Granada sits under San Mateo County coastal and fire-safety overlays, so any structural work, new fenestration, or exterior change needs a county review. Interior cabinet and countertop work usually does not. We’ll tell you which category your project falls into and pull permits when they are required. Call (833) 589-8103 to sort it out before you buy materials.
Service Areas Near El Granada
We work throughout the San Mateo County coast and beyond. If you’re in CGI service in Hillsborough, CGI service in Burlingame, or the surrounding Peninsula communities, we bring the same coastal-material knowledge to your project.
Book Your CGI Service in El Granada Today
Let’s figure out what the job actually needs, then we’ll talk materials. Call (833) 589-8103 to schedule a free CGI service estimate in El Granada. We’ll walk the windward walls with you and tell you what holds up and what doesn’t.
Written by Glen Sorrento, Owner at Seaside Contractors, serving El Granada and the San Mateo County coast with full-scope general contracting and Montara CGI service.