Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Redwood Shores, CA | Seaside Contractors
We provide independent CWS cabinet, countertop, and full-kitchen construction service throughout Redwood Shores, CA. We’re not a manufacturer-authorized dealer, and we won’t pretend to be one. What we are is a general contracting crew that has spent years working inside this community’s slab-on-grade townhomes and waterfront homes, which means we know exactly how CWS products behave when bay mud settles, groundwater rises, and marine-layer fog sits on exterior walls ten months out of the year. Call (833) 589-8103 for a free estimate on CWS cabinet installs, refacing, or full kitchen remodels in Redwood Shores.
Why Redwood Shores Residents Choose Us for CWS Service
Our owner, Glen Sorrento, grew up in Foster City’s Shell Cove neighborhood watching lagoon-side homes get built and rebuilt, then studied building construction technology at College of San Mateo before spending two-plus decades working Peninsula job sites. When a Redwood Shores homeowner calls about a CWS cabinet run that’s gone soft at the toe-kick, Glen doesn’t need a site walk to guess why. The slab settlement and winter groundwater in this community create failure patterns that don’t show up in Redwood City or San Carlos, where the ground is solid and the water table sits lower. That’s the practical knowledge we bring to every CWS sales & service job. We use OEM CWS hinges, drawer slides, and door fronts when the box is still square and dry. When it’s not, we say so, and we switch to plywood replacement boxes and quality aftermarket soft-close hardware without trying to patch particleboard that’s already wicking moisture.
Styles & brands we work with
Common CWS Construction Problems We Solve in Redwood Shores
- Swollen cabinet boxes from bayfront humidity. Fog and damp air get behind poorly sealed backsplashes and swell CWS particleboard boxes from the bottom up. We routinely find soft toe-kicks and delaminated gables under sinks in Redwood Shores, where exterior humidity stays high even when it’s not raining. We replace what’s wet, re-seal what’s salvageable, and recommend plywood boxes for anything going back in a high-moisture spot.
- Thermofoil and painted door blistering on bay-facing walls. South- and west-facing kitchens behind single-pane slider glass see intense reflected glare off the water. After a few summers, thermofoil CWS doors peel and painted finishes bubble. This isn’t a manufacturing defect. It’s what happens when marine-layer condensation meets UV exposure. We reorder replacement doors and drawer fronts from CWS when the finish is still available, or reface with painted maple when it’s not.
- Frameless cabinet runs racked out of square by slab settlement. Redwood Shores sits on engineered fill over bay mud, and it moves. Doors that hung clean at install start rubbing after a few wet winters, not because the CWS box failed but because the room shifted under it. We re-level, re-shim, and re-align the runs, checking the slab transition before blaming the cabinet.
- Quartz and granite seam staining from groundwater wicking. When winter storm runoff backs up through slabs and wicks into cabinet bases, moisture travels up through CWS island seams and leaves efflorescence staining at the surface. This one is specific to low-lying, flat communities like Redwood Shores. We address the moisture path, replace the affected base, and re-seal seams.
- Water-damaged toe-kicks and gables under sinks. The most common call we get. In a 1989 slab-on-grade townhome off Redwood Shores Parkway, our crew pulled out a water-swollen CWS particleboard cabinet run that had wicked groundwater through the toe-kick during a winter storm. We re-leveled the slab transition and set new plywood-box CWS cabinets with quartz tops and a raised electrical outlet above base flood elevation.
CWS Service in Redwood Shores: What Local Conditions Mean for Your Equipment
Here’s what most cabinet installers won’t tell you until it’s too late: Redwood Shores is a master-planned community built entirely on filled baylands behind engineered levees, and even a cabinet-and-counter swap in a 1980s townhome can trigger a floodplain review and elevation check that would never come up a mile inland in Redwood City. The community’s private levees and FEMA flood-zone designation mean any work that changes plumbing or electrical penetrations in a kitchen or bath has to account for base flood elevation, not just aesthetics. We scope CWS installs here with that reality in mind from the first walkthrough: electrical outlets above BFE, plumbing penetrations sealed against backflow, and cabinet bases spec’d for plywood instead of particleboard anywhere groundwater is even a possibility. Most Redwood Shores kitchens are in 1980s-1990s PUD townhomes on slab-on-grade foundations. The water table is close. The fill settles. The Redwood Shores service area we cover every week has site conditions that make generic kitchen advice useless. That’s why our estimates here start with a look at what’s under the floor, not just what’s on top of it.
CWS Models & Products We Service in Redwood Shores
We work on the full range of CWS cabinetry you’ll find in Redwood Shores Home Remodeling kitchens. That includes shaker-style all-plywood base and wall cabinets with soft-close, frameless boxes, painted maple and thermofoil cabinet doors from 1980s and 1990s PUD kitchens, CWS quartz and granite countertops with undermount sink cutouts, and full-overlay refacing doors and drawer fronts. The parts question matters. We use OEM CWS hinges, drawer slides, and door or drawer fronts when the box is sound and the finish is still in production, and shift to quality aftermarket soft-close hardware plus plywood replacement boxes when a thermofoil or particleboard cabinet has swollen past saving. For bay-mud townhomes, our rule is simple: anything that sat wet gets replaced, anything still dry and square gets repaired. No guesswork on warranty coverage either, which we’ll get to below.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Redwood Shores
What you’ll pay depends on what’s actually wrong, and we’ll tell you straight. Here are the price ranges we work within for CWS-related work in Redwood Shores:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
A free estimate from us includes a look at the slab, the toe-kicks, the existing cabinet boxes, and the flood elevation status of your kitchen penetrations. It does not include a sales pitch for work you don’t need. Call (833) 589-8103 for an exact quote on your Redwood Shores project.
Serving Redwood Shores, CA — Our Local Coverage Area
We’re based in the Redwood Shores area and know this community well as our General Contractor in Redwood Shores. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Redwood Shores
If the cabinet box has swollen from moisture wicking up from the slab, refacing won’t fix it. The box is the structural core, and once particleboard has absorbed enough water to feel soft at the toe-kick, the entire gable is compromised. We’ll replace the run with plywood-box CWS cabinets and reface the doors and drawers only if the boxes themselves are still dry and square. Most Redwood Shores kitchens we see with soft toe-kicks need replacement on the wet wall and repair elsewhere. Call (833) 589-8103 and we’ll tell you which one you have.
Yes, often. Redwood Shores sits on engineered fill behind private levees, and depending on your specific address and the scope of work, changes to plumbing and electrical penetrations can trigger a floodplain review and elevation check. CWS in San Carlos and Redwood City, sitting on solid ground a mile inland, generally doesn’t face the same requirement. We handle that paperwork and scoping as part of the job, keeping outlets and plumbing above base flood elevation where the review requires it.
Bay-facing walls in Redwood Shores take reflected sunlight off the water plus marine-layer humidity, and after a few seasons that combination causes thermofoil to delaminate from CWS door fronts. The finish hasn’t failed from normal wear. The door is reacting to a specific moisture-and-UV environment we see consistently in waterfront and lagoon-side homes here. Replacement doors and drawer fronts from CWS are the cleanest fix when the finish is still available, and refacing with painted maple is the option when it’s not.
Yes, and we do it regularly. The key is checking the slab transition for settlement before setting the island, and making sure the base doesn’t sit where groundwater can wick into the cabinet. We’ve installed CWS quartz islands over bay-mud slabs in CWS in San Mateo and Redwood Shores without issues, including re-leveling the transition and keeping electrical penetrations raised above base flood elevation. The island itself is fine. The site prep is what separates an install that lasts from one that doesn’t.
We’re an independent contractor, not a CWS-authorized dealer, so we don’t administer CWS’s manufacturer warranty. What we do is install and repair CWS products correctly, using OEM parts where they’re the right call and a workmanship warranty on our labor. If manufacturer coverage is important for your Redwood Shores remodel, we’ll walk you through what’s covered and what isn’t before you spend a dollar. Call (833) 589-8103 and we’ll lay it all out.
Service Areas Near Redwood Shores
Beyond Redwood Shores, we take CWS cabinet and countertop calls in Belmont and Foster City, two communities with their own waterfront construction realities. Check out CWS service in Belmont and CWS service in Foster City for what’s different there. We also cover Watsonville, Pajaro, Freedom, Interlaken, Las Lomas, and Amesti for larger scopes and full kitchen remodels.
Book Your CWS Service in Redwood Shores Today
Glen Sorrento and the Seaside Contractors crew know Redwood Shores construction from the bay mud up. Let’s figure out what the job actually needs, then we’ll talk materials. Call (833) 589-8103 for your free estimate. We’ll schedule a site walk, check the slab and the flood elevation, and give you a written, line-item quote.
Written by Glen Sorrento, Owner at Seaside Contractors, serving Redwood Shores and the Peninsula.