Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in San Juan Bautista, CA | Seaside Contractors
We provide independent Mr-Glass service throughout San Juan Bautista, from frameless shower enclosures to tub-to-shower conversions in homes around the Plaza and the quieter streets on the town’s edges. The thing that makes our Mr-Glass work different here is simple: we know how century-old adobe and wood-frame walls shift with the San Andreas Fault, and we anchor every glass install accordingly. Call (833) 589-8103 for a free estimate.
Seaside Contractors is a full-scope general contractor, and Mr-Glass sales & service is one of the pieces we handle for San Benito County homeowners. We’re independent, which means we service every Mr-Glass enclosure on its own merits. Not under manufacturer authorization. Not under a warranty endorsement. Just straight answers about whether your shower door needs new hinges or a full replacement.
Why San Juan Bautista Residents Choose Us for Mr-Glass Service
We’ve worked with enough Mr-Glass shower enclosures and glass systems in this town to know how their hardware ages in San Benito Valley conditions. Anodized frames that pit from mineral-heavy water. Sweep gaskets that give out at the pan-to-glass joint. Pivot hinges loosening as historic walls move through the seasons. None of this surprises us anymore, and that’s the point.
Glen Sorrento, our owner, studied building construction technology at College of San Mateo and has spent two-plus decades working through nearly every project type this region throws at a contractor. He’s the guy who can read a spec sheet for Cambria quartz and a GAF Timberline system in the same afternoon and give you a straight answer on both. When it comes to Mr-Glass hardware in an 1880s adobe house on Second Street, he’ll tell you whether the door can be saved before he sells you a new one. That’s the kind of practical judgment you want when a shower enclosure starts leaking into a historic subfloor.
What Set Us Apart
- Independent service for every Mr-Glass install, with no manufacturer authorization pushing us toward replacement over repair.
- Genuine Mr-Glass hinges, sweeps, and seals sourced where available, with quality aftermarket gaskets and glass when OEM parts are slow.
- Full general contractor capability behind the glass: framing, waterproofing, and structural anchoring, not just glass and aluminum.
- One accountable team from first measurement to final caulk line, serving San Juan Bautista service area and the surrounding valley.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in San Juan Bautista
These are the issues we see most often in San Juan Bautista homes, and each one ties back to a local condition an out-of-town crew wouldn’t recognize.
- Anodized aluminum frames and hinges pitting or whitening. Mineral-heavy well and municipal water, combined with humid winter bathrooms in older adobe homes, breaks down anodized finishes faster than coastal installers expect. We see it on Mr-Glass frameless doors within a few years. Fresh hardware and a better sealing routine usually solve it.
- Silicone seals and sweep gaskets failing at the pan-to-glass joint. When that bottom seal goes, water wicks into historic wood subfloors and starts rot you can’t see until the floor feels soft near the curb. We catch this early on service calls and replace the gasket before the framing goes.
- Pivot and hinge hardware loosening as walls shift. Century-old studs and adobe walls move seasonally in this town. A hinge that was square in July is binding by January. We re-square the opening, re-anchor the hardware, and set the door to tolerate the movement.
- Hard-water spotting and etching on glass and chrome. San Juan Bautista’s water leaves scale that etches glass permanently if it sits. Enclosures that aren’t sealed and squeegeed go cloudy fast. We recommend glass treatments and can swap etched panels when it’s too far gone.
- Sliding doors jumping track after seismic retrofits. When an older home gets retrofitted, the new blocking isn’t always even. Doors that rolled smoothly for decades suddenly bind or derail. We re-level the track and shim the framing so the door moves again.
Mr-Glass Service in San Juan Bautista: What Local Conditions Mean for Your Equipment
Because the San Andreas Fault runs essentially through San Juan Bautista, our Mr-Glass shower and glass installs inside the historic core often get anchored into retrofitted or reinforced framing. That’s not how it works in Hollister or Mr-Glass service in Gilroy or anywhere else in the county. Here, a frameless glass panel can’t just mount to whatever studs are behind the wall. We have to check what a prior seismic retrofit left behind, because the blocking is rarely square and rarely where a standard door wants it.
On a job near the Plaza, our crew replaced a failing Mr-Glass in Aromas-style semi-frameless tub-shower enclosure in a century-old wood-frame home whose original studs had shifted and left the sliding door out of plumb. We re-squared the opening, anchored new framing where a prior seismic retrofit had left uneven blocking, and set a frameless Mr-Glass panel with fresh hinges and a continuous sweep seal so water stopped wicking toward the old subfloor. That’s the kind of job you can’t do right without understanding both the glass and the building behind it. And any exterior glass change near the Plaza can trigger historic-review conditions, which we’ll walk you through before any permit gets pulled.
Mr-Glass Models & Products We Service in San Juan Bautista
We service the full Mr-Glass line most homeowners in this area actually own: the Frameless Shower Door Series in hinged and sliding configurations, Semi-Frameless Sliding Tub-Shower Enclosures, Neo-Angle Corner Shower Enclosures, and Custom Glass Panel & Pivot Door systems. When replacement parts are needed, we source genuine Mr-Glass hinges, sweeps, and seals where available. When OEM parts are discontinued or backordered for weeks, we use quality aftermarket gaskets and glass that meet or exceed the original spec.
Let’s figure out what the job actually needs, then we’ll talk materials.
Sub-Services We Emphasize for Mr-Glass Work
- Frameless Glass Shower Enclosures
- Walk-In Shower Installation
- Tub-to-Shower Conversion
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in San Juan Bautista
Pricing varies with the enclosure, the condition of the opening, and whether we’re repairing hardware or doing a full install. Historic homes near the Plaza sometimes cost more because of the framing work a seismic retrofit leaves behind. Our estimates are free, written, and line-itemed so you see exactly where the money goes.
| Mr-Glass Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
Call (833) 589-8103 for an exact quote on your Mr-Glass shower or enclosure. Estimates are free, and we’ll tell you honestly whether repair or replacement makes more sense.
Serving San Juan Bautista, CA — Our Local Coverage Area
We’re based in the San Juan Bautista area and know this community well, with Mr-Glass repair in Prunedale also in our service range. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in San Juan Bautista
Yes. We’ve installed frameless Mr-Glass enclosures in adobe and century-old wood-frame homes throughout San Juan Bautista’s historic core and offer Las Lomas Mr-Glass service as well. The key is working with the framing you have, which often means adding blocking, re-squaring an opening, or anchoring into a previous seismic retrofit. Call (833) 589-8103 and we’ll tell you exactly what your walls need.
Mineral-heavy water, humid winter bathrooms in older adobe homes, and seasonal wall movement from the San Andreas Fault all take a toll on hinges and gaskets. Anodized finishes pit, seals wick water, and pivots loosen. Regular maintenance and the right replacement parts slow that down considerably.
Interior shower enclosure replacements generally don’t trigger historic review, but any exterior glass change, or work that alters a protected wall, can. If your project touches a window, exterior door, or structural wall near the Plaza, we’ll check the review requirements before any work starts. Call (833) 589-8103 if you’re unsure.
Most Mr-Glass doors in San Juan Bautista are fixable before they’re replaceable. New hinges, a continuous sweep seal, and fresh silicone usually cost a fraction of a full replacement and extend the enclosure for years. We’ll give you a straight comparison on your specific door before you commit to anything.
Yes. We handle the full conversion, including tub removal, waterproofing, new pan, and a Mr-Glass enclosure. In older homes near the Plaza, we pay particular attention to the subfloor and existing framing, since that’s where water damage and seismic movement show up first. Call (833) 589-8103 for a free conversion estimate.
Service Areas Near San Juan Bautista
From our shop we cover Mr-Glass service in Live Oak and Mr-Glass service in Twin Lakes, and we regularly run calls to Watsonville, Pajaro, Freedom, Interlaken, Las Lomas, and Amesti. If you’re anywhere in the San Benito Valley or the Pajaro Valley side, we can get to you.
Book Your Mr-Glass Service in San Juan Bautista Today
If your Mr-Glass shower door is leaking, binding, or showing hard-water damage, don’t wait for the subfloor to tell you it’s too late. Call (833) 589-8103 today and we’ll schedule a free estimate. We’ll bring the tools, the parts, and the straight answer on whether to repair or replace.
Written by Glen Sorrento, Owner at Seaside Contractors, serving San Juan Bautista and the San Benito Valley.