Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Construction in Bonny Doon, CA | Seaside Contractors
Therma-Tru doors and windows in Bonny Doon face conditions you won’t find on a flat suburban lot: fog-belt rain hammering west-facing entries, hillside framing that shifts under the door, and Cal Fire WUI review on every rebuild. We’re an independent Therma-Tru service provider, not manufacturer-affiliated, and we diagnose based on how your door actually performs in the Santa Cruz Mountains. If you need a Therma-Tru entry door repaired, re-flashed, or replaced in Bonny Doon, call us at (833) 589-8103 for an honest assessment and a free estimate.
Seaside Contractors has installed and serviced Therma-Tru in Mount Hermon and across the Santa Cruz Mountains for years. We know how their Fiber-Classic and Smooth-Star fiberglass lines behave under real WUI conditions – not showroom conditions. Because we’re independent, we recommend repair or replacement based on how the door is holding up here, not on a dealer program.
Why Bonny Doon Residents Choose Us for Therma-Tru Service
We’ve pulled warped Therma-Tru slabs off Bonny Doon Road rebuilds and re-hung them so the multi-point latch engages cleanly. That’s the work that matters when a county inspector is standing at the front door. Our Therma-Tru sales & service work covers everything from stuck deadbolts to full entry door replacements, always matched to the exposure your house actually gets.
Glen Sorrento, our owner, grew up watching lagoon-side homes in Foster City get built and rebuilt, then spent two-plus decades working nearly every project type the region throws at a contractor. He’s the one who’ll look at your door jamb, the slope behind your foundation, and the way rain wraps around your entry – and give you a straight answer on whether Therma-Tru repair in Felton or nearby makes sense. Let’s figure out what the job actually needs – then we’ll talk materials.
When we repair a Therma-Tru door in Bonny Doon, we use genuine Therma-Tru sills, sweeps, hinges, and multi-point hardware where the slab and frame are sound. If the frame has failed or rot is behind the flashing, we’ll tell you that too, and explain why replacement usually beats patching on a Bonny Doon exposure.
Styles & brands we work with
Common Therma-Tru Construction Problems We Solve in Bonny Doon
- Faded, chalky fiberglass on south and west elevations. Bonny Doon’s sunny southwest-facing lots put direct UV on Therma-Tru Fiber-Classic and Smooth-Star slabs for hours every afternoon. The fiberglass skin oxidizes, the factory finish chalks, and paint stops bonding. We refinish or, when the skin is too far gone, replace the slab.
- Rotted composite jambs from wind-driven rain. Winter storms hit west-facing entries hard in Bonny Doon. When flashing behind the brickmold was installed wrong or has failed, water gets behind the frame and the composite jamb swells, delaminates, and rots. We rebuild the rough opening, re-flash the threshold, and set a fresh slab.
- Sticking and dragging doors from hillside framing movement. Older post-and-beam and owner-built Bonny Doon homes shift on their slopes. When the header settles, a Therma-Tru door that worked fine for 20 years starts dragging at the latch and the multi-point hardware drifts out of alignment. We re-shim, re-align the hinges, and reset the hardware so it latches cleanly.
- Racked slabs after a rebuild or deck retrofit. On a CZU-fire rebuild, rough openings often get framed to fire-hardening specs that don’t match the original door rough opening. The Therma-Tru slab gets racked or hinge-bound. We address the opening, not just the door.
- Degraded weatherstripping on fire-hardened assemblies. Post-fire rebuilds in Bonny Doon use ember-resistant venting and tighter assemblies, but the original Therma-Tru sweeps and weatherstripping age faster under that heat and WUI-rated materials. We replace with proper compression-fit weatherstripping that keeps embers and fog-belt moisture out.
Therma-Tru Service in Bonny Doon: What Local Conditions Mean for Your Equipment
Because Bonny Doon rebuilds fall under Cal Fire and Santa Cruz County WUI defensible-space and construction review, exterior door assemblies here – including how Therma-Tru slabs and frames are flashed and fire-rated – get scrutinized during permitting in a way they don’t on flat suburban lots. A door that passes inspection in Watsonville might fail review off Bonny Doon Road if the flashing detail doesn’t meet the county’s current WUI standard. We’ve worked those reviews, and we know what gets flagged. This is the only page that ties Therma-Tru door and window failures directly to Bonny Doon’s post-CZU WUI permitting, fog-belt rain exposure, and hillside framing movement – practical repair-versus-replace guidance you won’t find on a generic brand or city page.
On a CZU-fire rebuild off Bonny Doon Road, our crew replaced a warped Therma-Tru Smooth-Star entry door whose composite jamb had rotted where the original flashing failed on the rain-exposed side. We rebuilt the rough opening, re-flashed the threshold, reset a fresh fiberglass slab with new sweeps and hinges, and re-hung the multi-point hardware so it latched cleanly. The result was a weather-tight, defensible entry that passed county review without rework.
Therma-Tru Models & Products We Service in Bonny Doon
We service Therma-Tru in Pasatiempo and the full fiberglass and steel entry door lines: Fiber-Classic and Smooth-Star fiberglass entry doors, the Classic-Craft Collection (American, Canvas, and Rustic styles), fiberglass patio and hinged exterior door systems, and steel entry doors with factory-primed frames. We use genuine Therma-Tru replacement parts – sills, sweeps, hinges, and multi-point hardware – where the slab and frame are sound, and quality aftermarket glass units and weatherstripping where OEM is impractical or discontinued. If a fiberglass or steel slab has a failed frame, delaminated skin, or rot behind the flashing, honest replacement usually beats patching on a Bonny Doon exposure.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Service Pricing in Bonny Doon
Here’s what you can expect for Therma-Tru-related work in the Bonny Doon area. The numbers reflect Watsonville market pricing, and your specific door, access, and permit situation will move the number within the range.
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Bathroom Remodel | $9,000 – $28,000 |
Your free estimate includes a door-by-door inspection, an honest repair-versus-replace recommendation, and a written line-item price with no change orders. We don’t charge to tell you what you actually need. Call (833) 589-8103 to schedule it.
Serving Bonny Doon, CA — Our Local Coverage Area
We’re based in the Bonny Doon area and serve Therma-Tru in Ben Lomond and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Construction in Bonny Doon
Usually not. Chalking on the fiberglass skin is cosmetic and can often be refinished, but if the underlying gel coat has cracked or the skin is delaminating, a new slab is the honest call. On a west-facing Bonny Doon entry, we’ll look at the whole exposure and tell you what’s better for your house. We’re independent, so we have no reason to sell you a door you don’t need. For a straight diagnosis, call (833) 589-8103.
Yes, when it’s flashed and installed to the current Cal Fire and Santa Cruz County WUI standard. The door itself is rarely the issue – the flashing detail at the threshold and the fire-rated assembly around the rough opening are what get flagged. We’ve passed those reviews, and we install to that standard from day one.
Hillside framing moves. Older Bonny Doon homes on post-and-beam or owner-built foundations settle and shift, and the header above the door settles with them. The slab starts dragging at the latch, and the multi-point deadbolt drifts out of alignment. We re-shim, re-align hinges, and reset the hardware, which usually fixes the problem without a new door. If the framing is still moving, we’ll talk about the structural fix first.
We keep common Therma-Tru replacement parts – sills, sweeps, hinges, and multi-point hardware – on our trucks for Bonny Doon calls. If your older door uses discontinued OEM parts, we’ll source quality aftermarket equivalents. If the frame is rotted or the slab is delaminated, patching isn’t worth it. We’ll tell you straight which situation you’re in, and what the numbers look like either way. Call (833) 589-8103 for an assessment.
Fog-belt rain is persistent and horizontal. It wraps around the entry, gets behind flashing that would be fine in a drier inland location, and sits in the composite jamb. Bonny Doon doors need better flashing details and more frequent weatherstripping replacement than the same Therma-Tru door installed in, say, Watsonville. It’s a real difference, and it’s built into how we spec and repair doors here.
Service Areas Near Bonny Doon
We provide Bonny Doon service area coverage and regularly work in Watsonville, Pajaro, Freedom, Interlaken, Las Lomas, and Amesti. We also handle Therma-Tru service in Brookdale and Therma-Tru service in Los Gatos for clients along Highway 9 and beyond.
Book Your Therma-Tru Service in Bonny Doon Today
If your Therma-Tru door is sticking, leaking, or just looking rough after another fog-belt winter, call (833) 589-8103 to schedule a free estimate. We’ll come out, look at the door and the exposure, and tell you what it actually needs. No pressure, no upsell.
Written by Glen Sorrento, Owner at Seaside Contractors, serving Bonny Doon and the Santa Cruz Mountains.