Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable General Contractor Across Broadmoor
A full-scope General Contractor in Broadmoor needs to understand two things most firms get wrong: this is unincorporated San Mateo County land wrapped inside Daly City, and the salt air off the Pacific does not forgive cheap hardware. Seaside Contractors handles both. We pull county permits, not Daly City ones, and we specify stainless, marine-grade, and rot-resistant materials from the first estimate, not as a change order later. Glen Sorrento leads every Broadmoor project personally, from scope through final county inspection. Call (833) 589-8103 for a free estimate.
Why Seaside Contractors Is Broadmoor’s Preferred General Contractor Company
We work in Broadmoor often enough to know the streets, the lots, and the county inspector’s checklist. The homes here are mostly 1940s and 1950s tract builds on tight parcels with attached garages, so remodels bump against setbacks and old drainage lines that Daly City’s newer subdivisions never see. That changes how we bid a job. When a Broadmoor homeowner calls us about a kitchen or bath remodel, the estimate already accounts for subfloor rot around the sink, galvanized pipes past their useful life, and the county’s drainage and retaining-wall expectations. Our customers in the 94015 ZIP don’t have to educate us. We show up knowing.
We hear the same thing from Broadmoor clients: another contractor pulled a Daly City permit and got bounced. County re-submittal fees and two-week stalls kill project momentum. We’ve managed enough Broadmoor jobs to pull the right permit the first time. That’s not marketing. That’s just not wasting your time. Call (833) 589-8103 and we’ll confirm the jurisdiction before we ever step on site.
Styles & brands we work with
Remodeling Contractor in Broadmoor
A remodeling contractor in Broadmoor handles the full interior scope: kitchens, baths, whole-home updates, and the structural surprises that come with post-war framing. Most Broadmoor kitchens run $14,000 – $45,000 depending on cabinet grade, countertop material, and whether we’re moving plumbing or walls. Smaller galley kitchens land between $9,000 – $20,000. Baths run $9,000 – $28,000, with walk-in shower work in the $4,500 – $12,000 range. What drives cost here isn’t square footage. It’s what’s behind the drywall.
We always include a scope line for hidden rot and failed flashing in Broadmoor bids. The fog band makes hidden damage more likely, not less. We’d rather price it once than surprise you mid-project.
Kitchen and bath packages
We pair KraftMaid cabinets with Cambria, Silestone, or Caesarstone countertops for Broadmoor kitchens that hold up to damp air. Bath packages lean on Schluter waterproofing behind the tile and Toto or American Standard fixtures. One contractor manages the whole room, including the plumbing, tile, cabinet install, and finish work.
Whole-home remodels
Older Broadmoor homes often need electrical panel upgrades, repiping, and insulation work before cosmetic finishes make sense. We sequence the whole job so you’re not living through a three-month patchwork. County inspectors want to see the mechanical work done right, and so do we.
Licensed General Contractor in Broadmoor
A licensed general contractor in Broadmoor is the difference between a job that passes county inspection and one that stalls at the permit counter. Broadmoor addresses list as Daly City, but San Mateo County processes the permits and sends the inspectors. Pull the wrong one and you’re paying re-submittal fees and losing weeks. We pre-check every lot because homes on Mayfair Avenue, Maddux Drive, and the surrounding streets all fall under the same county jurisdiction, even when the utility bill says Daly City.
Room additions here run $45,000 – $130,000. Driveway paver replacement sits between $7,000 – $18,000. These are county-permitted scopes. We pull permits, schedule inspections, and stay through sign-off. Glen Sorrento walks the final inspection with the county on most Broadmoor projects, because it’s faster to answer a question in person than to burn two days on a phone tag.
Foundation and drainage work
County inspectors reviewing Broadmoor additions frequently flag site drainage and retaining walls that haven’t been touched since the 1950s. We bring that up during the estimate, not as a surprise line item after the permit office gets involved. A $900 drainage correction priced up front costs less than a stop-work order later.
Structural scope and additions
Tight lot lines mean second-story and rear additions need precise setback work. We survey the parcel, mark the lines, and build to the county’s current standards from day one. No “we’ll see what the inspector says.” We already know.
Trusted Brands We Service in Broadmoor
We’re not tied to one supplier, and that matters in a coastal climate where material choice changes the lifespan of the work. For Broadmoor jobs, we often specify Schluter waterproofing behind shower walls, Delta or Toto plumbing fixtures for long-term corrosion resistance, and American Standard tubs and toilets where the budget needs to stay lean. Because we stock or can quick-order these lines for 94015 customers, we don’t have to wait on a distributor in San Jose to figure out what a marine-grade finish is. If you have a brand preference, tell us. We’ll match the material to the project, not the other way around.
Common General Contractor Problems We See in Broadmoor Homes
- Daly City permits on Broadmoor addresses. A contractor fills out the form, lists the address, and the system accepts it until the county reviews the application. The rejection comes a week later, and now you’re re-filing and re-paying. We’ve seen it happen to homeowners who didn’t know the difference.
- Corroded hardware from salt air. Standard galvanized fasteners on fences, railings, and roof flashing rust out in five to eight years this close to the coast. We specify hot-dip or stainless hardware on any exterior scope in Broadmoor, because replacing a rotted railing post costs more than using the right screw the first time.
- Soft subflooring around sinks and tubs. The fog band doesn’t just wet the outside of the house. Decades of slow humidity ingress and small plumbing leaks rot the plywood under 1950s kitchens and baths. If your floor flexes near the sink, that’s the early warning sign.
- Inadequate drainage on narrow lots. Broadmoor parcels are tight, and older homes were built before modern stormwater standards. County inspectors routinely flag downspouts that dump against foundations and retaining walls that were never engineered. Fixing it after a remodel starts always costs more than fixing it before.
See the difference
Before
After
Before
After
Before
AfterPricing for General Contractor in Broadmoor, CA
Here’s what we’re quoting for Broadmoor scopes in 2025, with real numbers, not vague bands:
| Project Type | Typical Range in Broadmoor |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Replacement | $8,000 – $20,000 |
| Window Replacement | $4,500 – $15,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Home Addition | $45,000 – $130,000 |
Coastal-spec work runs higher than inland pricing. Stainless fasteners, marine-grade hardware, and rot-resistant sheathing add roughly 8 – 15% to exterior scopes like roofing, fencing, and window replacement. It’s the cheapest money you’ll spend on the job. The alternative spec fails inside a decade, and then you’re paying for the right materials plus demolition. Estimates are free. Call (833) 589-8103 and we’ll walk the property and price it line by line.
We Also Serve Cities Near Broadmoor
Seaside Contractors covers Broadmoor and the surrounding communities including Colma, Daly City, South San Francisco, and Pacifica. If you need a General Contractor in Broadmoor or a full-scope remodel in a neighboring ZIP, we’ll come out and look. Same team, same coastal-spec standards.
Serving Broadmoor, CA — Our Local Coverage Area
We’re based in the Broadmoor area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About General Contractor in Broadmoor
Broadmoor is unincorporated San Mateo County land entirely surrounded by Daly City, so the county, not Daly City, holds permitting and inspection authority over every construction project here. A contractor who files a Daly City permit for a Broadmoor address will get rejected and have to re-file with the county. We verify jurisdiction before we submit anything. Call (833) 589-8103 and we’ll confirm your lot’s permitting path in the first conversation.
We recommend stainless steel or hot-dip galvanized fasteners on every exterior connection, plus marine-grade or rot-resistant materials for anything exposed to fog and salt air. Standard electroplated hardware rusts out within a few years this close to the Pacific. On a recent Broadmoor kitchen remodel, we found the original 1950s subfloor soft around the sink from decades of fog-driven moisture and a slow leak. We replaced the plywood and specified KraftMaid cabinets with marine-grade plywood boxes and stainless fasteners, then used Cambria quartz for the countertop because it shrugs off the damp. That project passed county inspection without a single change order for hidden rot.
A coastal-spec roof in Broadmoor typically runs 8 – 15% more than the same roof inland because it requires corrosion-resistant flashing, stainless fasteners, and sometimes upgraded underlayment for wind-driven moisture. A standard asphalt roof replacement in Broadmoor runs $8,000 – $20,000. The coastal upgrades add roughly $600 to $3,000 depending on roof size. That’s the difference between a roof that lasts 20 years and one that leaks at the flashing in eight. For an exact number, call (833) 589-8103 for a free estimate.
Yes. Broadmoor’s post-war tract homes sit on small, tightly spaced parcels, so setbacks, side-yard clearances, and access for equipment all affect what you can build. We measure and survey every lot before pricing an addition, and we tell you what the county will approve, not just what you want. That’s how you avoid paying for plans the county rejects.
Soft subflooring around sinks and tubs is the most common hidden issue in Broadmoor remodels, caused by decades of fog-driven humidity and slow plumbing leaks in 1940s and 1950s homes. We find it in most kitchens and baths we open up. Our Broadmoor bids include a subfloor replacement allowance up front, so the fix doesn’t become a change order mid-project. Call (833) 589-8103 to schedule a walkthrough and free estimate.
Get a Free Estimate From the Broadmoor Team
If you’re planning a remodel, addition, or any full-scope work on a Broadmoor property, call Seaside Contractors first. We’ll confirm the county permitting path, inspect for the coastal failure points we know to look for, and write a line-item estimate with the right materials priced up front. Glen Sorrento and the team are one call away: (833) 589-8103.
Written by Glen Sorrento, Owner at Seaside Contractors, serving Broadmoor and the greater San Mateo County coast since 1998.