Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable General Contractor Across Lexington Hills
If you’re planning a kitchen remodel, bathroom renovation, room addition, or ADU in Lexington Hills, you need a general contractor who understands that this community runs on narrow private roads, steep wooded lots, and Santa Cruz County’s stricter-than-average building rules. A typical kitchen remodel here runs $14,000 – $45,000, a bathroom remodel $9,000 – $28,000, and a home addition $45,000 – $130,000, with the final number set by your material choices and site access. Seaside Contractors manages every phase, from blueprint to final walkthrough, with one accountable team and a written scope before we order anything long-lead. Call (833) 589-8103 to schedule a free estimate.
Why Seaside Contractors Is Lexington Hills’s Preferred General Contractor Company
Homeowners in Lexington Hills keep recommending us because we plan for the things other contractors discover too late. We know that concrete trucks often can’t reach a hillside parcel off a one-lane private road. We know that winter rain can turn an open excavation into a washout overnight. And we know that Santa Cruz County’s WUI (Wildland-Urban Interface) and grading requirements will fail your inspection if they’re treated as an afterthought. That local knowledge changes how we schedule, what we order, and what we put in writing before work begins.
Our work across Lexington Hills has covered everything from structural retrofits on older redwood-and-cedar mountain homes to full kitchen and bath packages with Cambria quartz and KraftMaid cabinetry. Glen Sorrento leads every project with the same approach: lock the scope, confirm access, then order materials in the right sequence so nobody’s paying for idle crews or re-staged deliveries. If you want a contractor who treats your Lexington Hills property as a site-specific project rather than a generic job, call (833) 589-8103.
Styles & brands we work with
Licensed General Contractor in Lexington Hills
A licensed General Contractor in Lexington Hills is the single point of accountability for your entire project, from structural and systems work through finish selection. On a hillside property, that means managing the parts most homeowners never see: drainage and erosion control, pier-and-post foundation retrofits, and the waterproofing details that determine whether a remodel lasts twenty years or starts failing in five. Seaside Contractors handles all of it without handing you off to a patchwork of specialty subs.
Scope, Permits, and Single-Source Accountability
We pull the permits, schedule the inspections, and keep the job moving even when Santa Cruz County plan reviewers raise questions. Our trades work under one contract, so you’re never chasing a plumber who blames the electrician. For a bathroom remodel in Lexington Hills, that coordination is the difference between a tight six-week schedule and a four-month drift.
Material Planning Around Real Lead Times
The calendar on a Lexington Hills remodel is driven by lead times, not labor. Cambria slabs run six to ten weeks. Custom cabinetry from KraftMaid or Wellborn can run eight to fourteen. Architectural glass often longer. We write the allowances, order the long-lead items first, and give you a fixed price in writing before anything gets fabricated.
Residential General Contractor in Lexington Hills
A residential General Contractor in Lexington Hills has to think like a mountain builder, not a suburban remodeler. Most homes here are older cabins and custom redwood-and-cedar houses on hillside parcels, often with wood decks, pier-and-post foundations, and additions built in phases over decades. That’s work that means structural retrofits, deck replacement, and rebuilding rather than tract-style construction, and it’s exactly what our team is set up to do.
Whole-Home and Addition Work on Sloped Lots
Room additions and whole-home remodels in Lexington Hills start with access planning. We’ll tell you honestly whether a concrete truck can reach your pour site or whether we need a pump truck and staged material drops. That number goes into your written estimate before we start, not as a change order halfway through. Home additions here typically run $45,000 – $130,000, shaped by slope, foundation, and fire-safe material requirements.
Kitchen and Bath Packages with Real Brand Choice
We’ll match the material to the project, not the other way around. Want a Kohler shower system with a Schluter waterproofing substrate behind the tile? Done. Prefer Toto fixtures and Cambria countertops with KraftMaid cabinetry? We have direct access to those lines and fifty more. You choose the tier, and the same team installs it.
Trusted Brands We Service in Lexington Hills
Working with Seaside Contractors means your Lexington Hills project can spec materials most local remodelers can’t even quote. On a single job we might pair a Delta or American Standard rough-in with Toto fixtures, a Schluter waterproofing system behind the tile, and Cambria or Silestone on the counters. Our partnerships span more than fifty recognized brands across roofing, cabinetry, countertops, plumbing, windows, fencing, hardscaping, siding, and ADU manufacturing. That breadth means faster sourcing, competitive material pricing, and one warranty conversation if anything ever goes wrong. Call (833) 589-8103 and we’ll talk through your material options against your budget.
Common General Contractor Problems We See in Lexington Hills Homes
- Concrete trucks that can’t reach the site. Ordering a standard delivery on a one-lane private road ends with a blocked road, an angry neighbor, and a re-staging fee. We plan for pump trucks and staged drops from day one.
- Failed WUI and grading inspections. Santa Cruz County requires defensible-space and ignition-resistant materials on hillside parcels. If those details aren’t built into the rough-in, the rework is expensive and the inspection fails.
- Long-lead materials ordered too late. Custom cabinetry and architectural glass run months, not weeks. If the cabinet order goes in after demo, your kitchen sits empty for the entire lead time.
- Deferred maintenance on older mountain structures. Decks, posts, and pier foundations on redwood-and-cedar homes need evaluation before you add square footage. Skipping that step means building on a compromised structure.
See the difference
Before
After
Before
After
Before
AfterPricing for General Contractor in Lexington Hills, CA
Here’s what you should expect to pay in Lexington Hills, based on current market data for this area:
| Project Type | Typical Cost Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
These ranges reflect Lexington Hills site conditions: slope, access, foundation type, and WUI requirements all move the needle. A flat, easy-access lot off a main road will land at the low end. A steep hillside parcel with limited truck access will land higher. We give you a fixed written price before ordering any long-lead materials, so the number you approve is the number you pay. Call (833) 589-8103 for a free line-item estimate.
Planning High-End Work in Lexington Hills Around Access
In Lexington Hills, the first question on a high-end remodel is not which countertop to pick. It’s whether a box truck, a concrete mixer, or a crane can physically reach the property. Many homes here sit on parcels served by one-lane private roads with tight switchbacks. A standard 40-foot delivery truck will not make the turn. So every custom kitchen, every primary bath, every addition starts with an access plan: where materials get staged at the bottom, how they move up the hill, and what equipment is small enough to make the climb. That single constraint shifts cost and scheduling before design even starts, and it’s why our estimates for Lexington Hills include line items a South Bay contractor would never think to write.
We learned this the hard way so you don’t have to. On a steep, wooded lot off a one-lane private road in Lexington Hills, we managed a full kitchen and bath remodel featuring KraftMaid cabinetry, Cambria quartz countertops, and a Kohler shower system. Because material deliveries were limited to a staging area at the bottom of the driveway, we scheduled pump trucks for the concrete driveway and coordinated small equipment to move cabinetry and glass up the slope. The project stayed on schedule only because we locked the scope and allowances in writing before ordering the long-lead Cambria slabs and custom millwork. If you’re planning a General Contractor search with high-end finishes in mind, that’s the level of planning you should expect.
We Also Serve Cities Near Lexington Hills
Seaside Contractors works throughout the Santa Cruz Mountains and the surrounding South Bay. In addition to General Contractor in Lexington Hills, we serve homeowners in Los Gatos, Monte Sereno, Cambrian Park, and Scotts Valley. If you’re planning a remodel anywhere in this part of Santa Cruz County, call (833) 589-8103 and we’ll let you know if we cover your road.
Serving Lexington Hills, CA — Our Local Coverage Area
We’re based in the Lexington Hills area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About General Contractor in Lexington Hills
We stage materials at the nearest accessible point, usually the bottom of your driveway or a wide spot on the road, then move them up with smaller equipment. For concrete pours, we schedule a pump truck that can reach from the staging area. This is planned in your estimate, not discovered on delivery day. Call (833) 589-8103 and we’ll assess your specific road before quoting.
Custom cabinetry typically runs eight to fourteen weeks from order to delivery, and architectural glass can run longer depending on the fabricator. Cambria countertops usually run six to ten weeks. We place these orders immediately after you approve the written scope, so the clock starts before demo, not after. Call (833) 589-8103 for a schedule based on your actual selections.
We build grading, drainage, and ignition-resistant material requirements into the plan before permit submittal. That includes defensible space, fire-rated assemblies where required, and erosion control measures on sloped lots. Glen Sorrento reviews every Lexington Hills plan against current Santa Cruz County WUI checklists before anything goes to the county. Call (833) 589-8103 to talk through your property’s specific requirements.
Yes. We write the full scope, allowances, and material selections into a fixed-price contract before we order anything. That includes Cambria countertops, custom cabinetry, architectural glass, and any other long-lead item on the schedule. The price you approve is the price you pay. Call (833) 589-8103 for a written line-item estimate.
Every change is documented in writing with an updated price and schedule impact before the work proceeds. Most Lexington Hills remodels have a few small changes, and we handle them without drama. The discipline we insist on is that no long-lead item gets ordered until its allowance is locked, so changes don’t cascade into budget overruns. Call (833) 589-8103 to discuss your project scope.
Written by Glen Sorrento, Owner at Seaside Contractors, serving Lexington Hills home renovation and general contracting projects across Santa Cruz County.