Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in San Martin, CA | Seaside Contractors
We install and repair Unilock paver driveways, patios, and retaining walls across San Martin, CA. We’re an independent hardscape contractor, not a Unilock dealer or factory affiliate, which means we spec the right Unilock unit for your parcel without a sales quota behind the recommendation. If your Brussels Block driveway is shifting or your Pisa2 wall is spalling, call (833) 589-8103 and we’ll tell you straight what’s fixable and what needs to be pulled and re-laid.
Why San Martin Residents Choose Us for Unilock Service
Most San Martin properties are not suburban lots. They’re ranch parcels, equestrian spreads, and older farmhouses on multi-acre sites with wells, septics, and long rural driveways. That changes how pavers get installed. Glen Sorrento, our owner, grew up watching lagoon-side homes in Foster City get built and rebuilt, then spent two-plus decades working through the full range of Peninsula construction. He’ll tell you what the jobsite actually needs before anyone talks materials: “Let’s figure out what the job actually needs – then we’ll talk materials.”
We know Unilock’s product lines from repeated installs and repairs, not from a manufacturer training binder. When a San Martin homeowner calls us about a Brussels Block drive with edge settling, we’re not guessing. We’re pulling from the same failure patterns we see on Llagas Road, on Maple Avenue, on the parcels off Foothill Avenue. Our crew has handled Unilock sales & service work long enough to know which base prep holds on this valley’s soil and which doesn’t.
Styles & brands we work with







Common Unilock Construction Problems We Solve in San Martin
- Efflorescence bloom on Brussels Block and Beacon Hill Flagstone. San Martin’s wet winters pull groundwater up through pavers when the base doesn’t drain properly. The white powder isn’t a defect in the paver; it’s salts migrating upward. We diagnose the drainage issue first, then clean and seal so it doesn’t return by spring.
- Paver edge settling and lip at driveway aprons. Long multi-acre driveways see heavy truck traffic: feed trucks, horse trailers, propane deliveries. Rural soil compacts differently than urban fill. When the sub-base isn’t compacted in lifts to match that reality, the edges drop and you get a lip. We fix the base, not just the surface.
- Polymeric joint sand washout on sloped patios. San Martin’s hot, dry summers bake the joints until they crack. Then the first heavy rain scours the sand right out of them. We re-sand with a quality polymeric product rated for slope and re-compact. Cheap sand won’t survive one San Martin winter.
- Pisa2 wall block spalling and color loss. UV damage plus wildfire-smoke ash residue that traps moisture on north-facing walls is a combination we see on ranch properties throughout San Martin. The block face flakes. Color fades unevenly. We replace affected courses with matched Unilock units and recommend sealing where it makes sense.
- Driveway replacement for older failed pavements. When a San Martin driveway fails at the base layer, patching is a waste of your money. We’re direct about that. Pull it, re-grade, re-compact, re-lay. A patch over a bad base is a bet you’ll lose within one wet season.
Unilock Service in San Martin: What Local Conditions Mean for Your Equipment
Here’s the thing most contractors from Morgan Hill or Gilroy don’t anticipate when they take a San Martin job: every paver driveway and patio permit runs through Santa Clara County, not a city building department. San Martin is unincorporated, so there’s no city desk to walk into. County review takes its own timeline, and on multi-acre ranch parcels with existing wells, septic leach fields, and agricultural setbacks, the review often adds weeks before a single paver goes down. We plan for that on the front end. When a property off Llagas Road came to us with a rutted gravel drive they wanted converted to Unilock Brussels Block, we stripped and re-graded the base to shed runoff toward the pasture, compacted in lifts to handle truck traffic, and set the pavers with a soldier course edge. The second wet season, that drive is still tight with no lip at the apron. That’s what building to San Martin’s actual conditions looks like.
Unilock Models & Products We Service in San Martin
We install and repair the full range of Unilock hardscape products you’re likely to find on San Martin properties. Brussels Block and Beacon Hill Flagstone for driveways, patios, and walkways. Pisa2 retaining wall block for terracing, garden walls, and grade changes on sloping ranch parcels. Lineo and Umbriano slab pavers for a cleaner, more contemporary look. We source genuine Unilock units for repairs and color-matched replacements so patched areas don’t read as a different batch. And we use quality base aggregate and polymeric sand rather than whatever’s cheapest at the supply yard. Cheap base material on this valley’s soil fails faster, and we’d rather not redo the job because we saved you forty dollars on aggregate.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in San Martin
Every San Martin parcel is different: driveway lengths, soil conditions, county permit requirements, whether the site has a well or septic system to work around. Here’s where our paver and driveway work typically lands in this market:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
What drives the number is the base work: how much soil needs to be removed, how deep the compaction needs to go for the traffic your drive sees, and whether we’re working around existing utilities and septic lines. A free estimate from us is a written line-item quote. You’ll see exactly where the money goes. Call (833) 589-8103 and we’ll schedule a walk-through.
Serving San Martin, CA — Our Local Coverage Area
We’re based in the San Martin area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in San Martin
Yes, in most cases. Because San Martin is unincorporated, the Santa Clara County building department handles hardscape permits rather than a city office. A new paver driveway typically triggers county review, especially on larger parcels with agricultural designations. We handle the permit paperwork as part of our scope. Call (833) 589-8103 and we’ll tell you what your specific parcel requires.
Yes, when they’re installed correctly. The key is base preparation and drainage planning around existing well lines and leach field setbacks. We’ve installed Unilock Brussels Block drives on ranch properties off Llagas Road and Foothill Avenue where the base had to shed runoff toward pasture while keeping the drive tight under truck traffic. The pavers perform. The prep is what decides it.
That’s efflorescence: mineral salts migrating up through the paver from moisture below. It’s common on San Martin properties after wet winters, especially when the base doesn’t drain as it should. The white powder isn’t a Unilock defect. It’s a moisture and drainage symptom. We clean it, address the drainage where needed, and seal the surface to prevent recurrence. Call (833) 589-8103 for a look.
Yes. We source genuine Unilock units and color-match to your existing batch as closely as the line’s manufacturing allows. Batch variation is real; we’re upfront about that. But a matched genuine Unilock unit will blend far better than a box-store substitute, and it’ll perform the same. Estimates are free, so don’t guess.
San Martin’s hot, dry summers are actually a good window for paver installation: dry conditions mean the base compacts predictably and the polymeric sand cures without rain interference. What we watch is excessive heat on sealing days, which can affect sealant application. We schedule sealing early or late in the day during summer peaks. Call (833) 589-8103 to find out what fits your timeline.
Service Areas Near San Martin
We run Unilock hardscape work throughout southern Santa Clara County and into Santa Cruz County’s nearby communities. That includes San Martin service area coverage for full hardscape and general contracting scopes, plus Unilock installation and repair for homeowners just over the county line. We also serve Unilock service in Santa Cruz for coastal-climate installations with different drainage patterns than the valley, and Unilock service in Pasatiempo for hillside wall and paver work. Our crews also cover Watsonville, Freedom, and the Pajaro Valley corridor.
Book Your Unilock Service in San Martin Today
If your Unilock driveway is settling, your patio joints are washing out, or your Pisa2 wall is spalling, don’t wait for the next rain to make it worse. Call (833) 589-8103 to schedule your free estimate. We’ll walk the site, give you a straight answer, and write the quote.
Written by Glen Sorrento, Owner at Seaside Contractors, serving San Martin and the south Santa Clara Valley with full-scope general contracting and hardscape installation.