Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Colma, CA | Seaside Contractors
We’re an independent contractor providing Ameristar construction service across Colma, from the small residential duplexes off Mission Street to the light-commercial mortuary and mausoleum buildings that define this town. What makes our Ameristar work here different is straightforward: we understand how Colma’s near-daily marine fog and sandy high-water-table soils affect both the equipment and the structures around it. Call (833) 589-8103 to schedule a free estimate.
Why Colma Residents Choose Us for Ameristar Service
Colma has roughly 1,500 living residents and about 1.5 million buried, which means the construction work here skews institutional: mausoleum builds, columbarium expansions, memorial foundations, and the occasional remodel on a mid-century duplex. We’ve worked on enough Ameristar equipment across this fog-bound corridor to know its patterns cold. Glen Sorrento, our owner, grew up on the Peninsula and studied building construction technology at College of San Mateo before spending two-plus decades working nearly every project type the area throws at a contractor. That background matters when you’re spec’ing a heat pump for a mortuary office one day and a kitchen remodel for a Mission Street duplex the next. As an independent contractor, not a manufacturer dealer, our recommendations on Ameristar sales & service come from what the equipment actually needs, not a script.
Styles & brands we work with
Common Ameristar Construction Problems We Solve in Colma
Marine fog and damp onshore air are the defining conditions here, and they show up in predictable ways on Ameristar equipment:
- Condenser coil corrosion along the cabinet bottom edge. Ameristar M4AC condensers commonly show fin and bottom-rail corrosion within a decade in Colma because the fog keeps condensing surfaces damp near-daily. Water pools where the cabinet meets the base pan, and the aluminum fins start to rot from the bottom up.
- Frozen or iced-over coils on Ameristar M4HP heat pumps. The steady 50s fog-belt temperatures confuse defrost cycles. A unit misreads the conditions, spends too long defrosting, and the coil ices over. Then the low-charge shutdown follows.
- Condensate and moisture intrusion into Ameristar furnace cabinets. The tight mechanical closets in the mid-century duplexes off Mission Street trap humid air, and that damp finds its way onto control boards and igniter assemblies. Surface rust on a board is often the first sign.
- Capacitor and contactor failures. Marine-layer load swings make these units cycle hard. Capacitors dry out, contactors pit, and the condenser won’t start. These are honest, inexpensive fixes that too often get quoted as full replacements.
- Compressor failures from long-ignored coil corrosion. When the bottom third of a coil has rotted away, the system runs low on charge, the compressor runs hot, and it dies. Fog-belt damp accelerates this whole sequence.
Ameristar Service in Colma: What Local Conditions Mean for Your Equipment
Colma sits in the marine fog belt just east of the Daly City Ameristar service area, so surfaces here stay damp near-daily for much of the year. That’s not a minor detail for Ameristar owners. The same fog that slows concrete cure times and pushes rot detailing on any outdoor build also loads Ameristar outdoor condensing units with coil corrosion year after year. On a duplex off Mission Street near the El Camino Real corridor, we found an Ameristar M4AC condenser with its coil fins corroding across the bottom rail, years of fog-belt damp had eaten into the cabinet where water pooled, while the compressor still tested strong. We replaced the coil and cabinet hardware with OEM parts, sealed the base pan, and the unit is running dry into its next cooling season. That’s the kind of fix Colma’s damp air puts in front of us again and again. The ground matters too: construction near Colma Creek and the cemetery hillsides deals with loose sandy fill and a shallow water table, so any pad or curb we pour for an outdoor condenser needs deeper footings and sometimes dewatering. Every permitted dig here also triggers cultural and archaeological awareness given the ground’s burial history. We account for that before we ever break ground.
Ameristar Models & Products We Service in Colma
We service the full Ameristar residential and light-commercial lineup that’s common in Colma service area buildings: M4AC4 and M4AC5 air conditioner condensers, M4HP4 and M4HP5 heat pumps, M4PX packaged units, and the Freedom 80 and Freedom 95 gas furnace lines. We stock OEM Ameristar parts for control boards, igniters, and blower motors where fit and calibration matter, and we use quality aftermarket capacitors, contactors, and coils where they meet or beat spec. That keeps turnaround fast for Colma jobs without cutting corners on the parts that count.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Colma
Pricing depends on the equipment, the failure, and what’s behind the wall, but these are the ranges we typically see for the work Colma residents and building managers call us about:
| Service | Price Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
| Bathroom Remodeling | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
What drives the number is scope: a condenser coil replacement runs on the low end, a full kitchen remodel with cabinetry and counters on the high end. Every estimate is free, written, and line-itemed, so you know what you’re paying for before anything starts. Let’s figure out what the job actually needs, then we’ll talk materials. Call (833) 589-8103 for a quote.
Serving Colma, CA — Our Local Coverage Area
We’re based in the Colma area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Colma
No. We’re an independent contractor, not manufacturer-affiliated or authorized. That independence is the point: we recommend repairs and replacements based on what the equipment needs, not what a manufacturer agreement tells us to sell. If a unit under roughly a decade old has a single failed component, we repair it. If the coil or compressor is corroded through from years of fog-belt damp, we’ll tell you straight that replacement is the smarter spend. Call (833) 589-8103 for an honest assessment.
Colma’s near-daily marine fog means any remodel that touches exterior walls, ventilation, or exposed mechanical work has to handle moisture from day one. In a kitchen or bathroom remodel, that shows up as condensation on supply lines, damp in wall cavities where vent fans terminate, and accelerated corrosion on any Ameristar condenser or heat pump nearby. We detail for it: proper sealing, moisture barriers, and condensate management. The fog doesn’t stop a remodel, but ignoring it shortens the life of everything installed. Call (833) 589-8103 and we’ll walk you through it.
Most single-component repairs, capacitors, contactors, igniters, control boards, are same-day or next-day once we diagnose. Coil replacements and full system swaps take longer because we order OEM parts and schedule the work properly. The fog slows some outdoor work, but we build that into the timeline up front rather than surprising you with it.
M4AC4 and M4AC5 condensers, M4HP4 and M4HP5 heat pumps, M4PX packaged units, and the Freedom 80 and Freedom 95 gas furnace lines. If it’s an Ameristar unit in Colma, we’ve likely worked on its twin somewhere along El Camino Real or Mission Street, or across town for Ameristar repair in South San Francisco. Models outside that range we’ll assess case by case.
A capacitor or contactor replacement for our Pacifica Ameristar service customers usually runs a few hundred dollars. A coil replacement with OEM parts lands higher, often in the $1,500 – $3,500 range depending on the unit. A full condenser or heat pump replacement runs $6,000 – $14,000. Every estimate is free and line-itemed. Call (833) 589-8103 and we’ll give you exact numbers for your unit.
Service Areas Near Colma
We serve Colma and the surrounding corridor, including Ameristar service in Visitacion Valley, Ameristar service in Broadmoor, Daly City, South San Francisco, and San Bruno. Same team, same independent Ameristar expertise, same straight answers.
Book Your Ameristar Service in Colma Today
Call (833) 589-8103 to schedule your free estimate. We’ll assess your Ameristar equipment, look at what Colma’s fog and ground have done to it, and give you a line-item plan. One contractor. Every trade.
Written by Glen Sorrento, Owner at Seaside Contractors, serving the Peninsula and Colma for over two decades.