Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in San Carlos, CA | Seaside Contractors
CGI construction service in San Carlos means working with cabinetry, countertops, and metal roofing products inside homes built between the 1940s and 1960s. We’re an independent contractor, not a manufacturer rep, and we’ve spent years pulling CGI All-Wood cabinets and quartz counters through the permit and moisture realities of this city. If you’re planning a kitchen remodel or roof repair on a San Carlos ranch, call (833) 589-8103 for a free estimate. Glen Sorrento built Seaside Contractors around one question: what does the job actually need before we talk materials.
Why San Carlos Residents Choose Us for CGI Service
Most CGI work in San Carlos lands on post-war single-story homes with shallow foundations, detached garages, and framing that predates modern moisture barriers. We know those houses. Glen grew up on the other side of Highway 101 in Foster City, studied building construction technology at College of San Mateo, and has spent two-plus decades working Peninsula remodels, re-roofs, and additions. That background matters when a CGI cabinet spec has to account for a floor that slopes a quarter inch over six feet.
We also carry the breadth of a full general contractor. If your CGI kitchen remodel exposes cast-iron drain lines or a rotted sill plate, we handle it in house rather than pausing the job while you hunt for a plumber. You get one accountable team from CGI sales & service through final walkthrough. When OEM parts make sense, we source them. When aftermarket hinges or slides will outlast the originals, we tell you that too, straight.
Styles & brands we work with
Common CGI Construction Problems We Solve in San Carlos
- Cabinet box swelling and delamination. Older San Carlos homes, especially the 1940s-1950s ranchers near the Caltrain corridor, often lack range hoods that actually vent outside. Add wet winters and the result is moisture sitting against cabinet sides. We replace damaged boxes and correct the ventilation so the new CGI All-Wood cabinets don’t fail the same way in five years.
- Quartz countertop chipping at sink cutouts. Original fabrication errors show up as hairline chips at the narrow front edge of an undermount sink. On San Carlos remodels, we see this often enough that we inspect cutout edges during every estimate, even when the countertop looks fine from across the room.
- Metal roof rust at cut edges and fasteners. Fog rolls through the San Carlos hills and sits on metal panels in the flats. Cut edges exposed during a rushed install become rust lines within a few seasons. We treat, seal, and when necessary replace CGI Standing Seam panels, always paying attention to fastener gaskets that older roofs simply don’t have.
- Hinges and drawer slides giving out. High-traffic kitchens on tight San Carlos lots get used hard. The original hardware on a 15-year-old CGI cabinet set is often the first thing to go. We upgrade to aftermarket soft-close hardware that fits the existing door profile.
- Base cabinet rot from galvanized plumbing. San Carlos homes from the 1950s and 1960s frequently still have galvanized supply lines and cast-iron drains. When a slow leak behind the sink goes unnoticed, the cabinet base absorbs it. We’ve fixed this exact condition many times, usually while replacing the affected drain at the same time.
CGI Service in San Carlos: What Local Conditions Mean for Your Equipment
Here’s what separates CGI work in San Carlos from the same job in Belmont or CGI service in Redwood City: on the flats near downtown and the Caltrain corridor, lots are small and tightly packed. Any addition or exterior change that touches setbacks or daylight planes triggers neighbor notification and potential design review. What does that have to do with cabinets or countertops? Plenty. If a kitchen remodel involves relocating a window to fit a new cabinet layout, or bumping an exterior wall out eighteen inches for a larger island, the city needs to see a site survey and plot plan. We routinely pull those before finalizing CGI cabinet layouts that might alter window placements or exterior walls. That sequencing saves San Carlos homeowners weeks of redesign and a second permit review. A contractor who doesn’t know San Mateo County’s daylight-plane rules would spec the island first and ask questions later. We won’t do that to you.
CGI Models & Products We Service in San Carlos
We install and repair the full CGI product range most common in San Carlos kitchens: CGI All-Wood Kitchen Cabinets, CGI Quartz Countertops, and CGI Standing Seam Metal Roofing. Our parts approach is simple. OEM components when available and correct for the job. Aftermarket hardware when it outperforms the original spec, which is often the case for hinges and slides on older cabinet lines. For San Carlos turnaround, we stock common replacement hardware, touch-up kits for quartz edge chips, and metal roofing sealants matched to coastal exposure. That means most service calls don’t wait on a distributor.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in San Carlos
What drives cost on a CGI job in San Carlos? Scope, access, and what we find when we open the wall. A 1958 rancher with original plumbing will cost more than a 1990s remodel with modern supply lines. A second-story kitchen means material handling costs the first floor doesn’t. Our estimates are line-item, so you see exactly where the money goes.
| Service | Price Range |
|---|---|
| Kitchen Remodel | $14,000-$45,000 |
| Cabinet Installation | $4,000-$13,000 |
| Countertop Installation | $2,000-$6,500 |
| Roof Repair | $400-$1,800 |
Every estimate includes a site visit, measurements, and a written scope. Call (833) 589-8103 to schedule yours. We’ll match the material to the project, not the other way around.
Serving San Carlos, CA — Our Local Coverage Area
We’re based in the San Carlos area and know this community well. Use the map below to see our Home Remodeling in San Carlos service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in San Carlos
Yes, in most cases. OEM door and drawer fronts are the first route for exact grain and finish match. When a particular CGI door profile has been discontinued, we work with a local mill shop to replicate the profile and stain-match to your existing boxes. We’ll tell you before you spend a dollar which route your project needs. Call (833) 589-8103 for a cabinet match assessment.
We pull the permits. San Carlos sits under San Mateo County’s permit process, and kitchen remodels that touch plumbing, electrical, or exterior walls almost always require plan review. On tight lots near downtown and the Caltrain corridor, neighbor notification and daylight-plane review can add two to four weeks. We handle the paperwork, the site survey, and the inspections. It’s built into our scope from day one.
Two to five days for a standard kitchen, assuming the walls are square and the plumbing stays where it is. Older San Carlos ranchers sometimes add a day for shimming and leveling, especially when the floor has settled over seven decades. If we’re also replacing countertops, add another day for templating and a week for fabrication. We’ll give you a written schedule before we start.
We do both. Minor damage, a lifted panel, a failed fastener, can usually be repaired same visit. When rust has spread along cut edges or the panel profile has been discontinued, replacement is the honest answer. We inspect first and give you the repair-or-replace decision with numbers attached. Call (833) 589-8103 to schedule a roof assessment.
Sometimes. Quartz is heavy, about 20 pounds per square foot, and original 1950s cabinet boxes in San Carlos weren’t engineered with that load in mind. We check the cabinet structure before recommending quartz. In many cases we add a plywood substrate or reinforce the boxes. If the cabinets are too far gone, we’ll tell you that too, and pricing a full cabinet replacement is the smarter move. Call (833) 589-8103 and we’ll assess what you have.
Service Areas Near San Carlos
We run CGI service throughout San Carlos and the neighboring Peninsula cities. That includes San Carlos service area coverage for kitchen and bath remodels, plus CGI service in Redwood Shores for newer homes with coastal moisture exposure, and CGI service in Belmont for the mid-century housing stock that mirrors San Carlos. If you’re just over the city line, call us and we’ll confirm coverage.
Book Your CGI Service in San Carlos Today
From blueprint to final walkthrough, one contractor handles the whole job. Call (833) 589-8103 to schedule your free CGI estimate in San Carlos. We’ll figure out what the job actually needs, then we’ll talk materials.
Written by Glen Sorrento, Owner at Seaside Contractors, serving San Carlos and the Peninsula.