Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Sunnyvale, CA | Seaside Contractors
We’re Seaside Contractors, an independent general contractor that specifies, installs, and corrects CGI building-envelope systems across Sunnyvale, and we also work with CGI in Mountain View. We are not a CGI dealer or authorized rep, and that’s exactly why homeowners call us: we read CGI’s published detailing requirements, build to them, and document every layer so the assembly performs long after final inspection. What makes our CGI work different in Sunnyvale is simple. We’ve spent enough time on Eichler and ranch lots here to know that a metal roof or rainscreen panel is only as good as the flashing sequence behind it, especially when a protected heritage oak is sitting ten feet from the property line. Call (833) 589-8103 to schedule a free estimate, and let’s figure out what the job actually needs – then we’ll talk materials.
Why Sunnyvale Residents Choose Us for CGI Service
Most contractors in Sunnyvale can hang a metal panel. Few can tell you why an exposed-fastener roof is backing out screws along the eave run on a low-pitch mid-century home in Birdland, and fewer still will correct the thermal movement allowance instead of just driving longer fasteners. Our team has spent years working on CGI roofing, wall panels, and window systems across the Bay Area, including dozens of jobs in Sunnyvale’s Eichler tracts and newer infill near downtown. Glen Sorrento, our owner, studied building construction technology at College of San Mateo and has spent two-plus decades working through nearly every project type the Peninsula throws at a contractor. When we install CGI systems, we use CGI’s own panel clips, fasteners, and drainage trim where warranty-critical performance is on the line. Aftermarket parts only enter the conversation when they’re dimensionally and metallurgically compatible. That distinction is the difference between a roof that runs clean for twenty years and one that starts leaking the first winter after install. For full-scope CGI sales & service, we’re the team that can spec the roof, correct the substrate, and stand behind the whole assembly.
Styles & brands we work with
Common CGI Construction Problems We Solve in Sunnyvale
Here’s what we actually see on Sunnyvale jobsites, not what a product brochure predicts.
- Winter leaks at panel laps and penetrations on flat and low-pitch mid-century roofs. Sunnyvale’s mild climate lulls homeowners into thinking their roof is fine – until November rains arrive and the ponding starts. Years of debris on low-slope roofs wear down sealant at laps and pipe penetrations long before interior staining shows. On CGI exposed-fastener systems, we commonly find sealant failure at panel transitions near the eave line, exactly where water sits longest.
- Oil-canning and fastener backout on long, low-slope runs. CGI specifies thermal movement allowances for a reason. When panels are installed tight with no room to expand and contract through Sunnyvale’s dry summer-to-winter temperature swings, the metal oil-cans, loosens, and backs out fasteners at ridge and eave lines. We see this most on the long, continuous roof planes common on Eichler and ranch homes.
- Rainscreen and wall-panel mis-detailing on tight-lot infill. Near downtown Sunnyvale and the transit corridor, builders squeeze new multi-story homes onto narrow lots. We get called in when a CGI rainscreen system starts trapping moisture because the air/water barrier was skipped or the flashing sequence was installed in the wrong order. It never shows up as an obvious leak. It shows up as peeling paint, damp sheathing, and a musty smell.
- Pitting and finish-fail on CGI aluminum window and door frames. Sunnyvale’s dry, high-UV summers are brutal on west- and south-facing aluminum. When the specified drainage and weep details get skipped – which happens more than anyone wants to admit – water sits in the frame channels, the finish fails, and pitting follows. We correct the weep path and reseal the frame rather than telling you to replace good glass.
- Roof-deck rot discovered under a “patched” metal roof. We tore into a Birdland low-pitch roof that had been patched twice over a wet deck. The CGI panels were lifting at laps, fasteners backing out along the long eave run. Stripping it to the sheathing revealed saturated underlayment that had to go. Patching over a wet assembly just moves the failure down the road. That job needed a full strip, new underlayment, corrected flashing at the wall and valley, and a proper clip-and-movement reinstall of the CGI system.
CGI Service in Sunnyvale: What Local Conditions Mean for Your Equipment
Sunnyvale’s tree ordinance is the hidden schedule-driver on CGI rebuild work, and it bites before demolition even begins. The older Eichler and ranch homes in neighborhoods like Cherry Chase and Birdland sit on lots where decades-old heritage oaks and redwoods are protected. Removing one requires a city permit and often a replacement plan. For a CGI metal roof or rainscreen install, that changes everything. Panel and flashing layout gets reworked to maintain setback clearances. Staging and crane access shift away from root-protection zones. Delivery paths get rerouted so trucks don’t compact the soil over a protected tree’s root system. We’ve had jobs where the roof’s drainage path was entirely redesigned because the original downspout location would have sent water toward a protected oak’s trunk. That kind of constraint is specific to Sunnyvale, and it’s the kind of thing a contractor who doesn’t work here regularly learns the hard way: with a stop-work order and a red-tag on the permit.
CGI Models & Products We Service in Sunnyvale
We work across the CGI product lines most relevant to Sunnyvale’s housing stock, including projects for CGI in Cupertino. That includes CGI standing seam and exposed-fastener metal roofing systems, which are a practical upgrade for the flat and low-pitch roofs common on mid-century homes. We also install and correct CGI exterior wall panels and rainscreen cladding on wood-frame rebuilds, and we handle CGI thermal-broken aluminum window and sliding-door systems used in Eichler-era retrofits. CGI soffit, fascia, and gutter trim accessories are part of the package, because a low-pitch roof lives and dies by its edge detailing. When you schedule service, we confirm which CGI components we can source locally for fast Sunnyvale turnaround and which require a factory order. Our honest stance on parts: CGI’s own clips, fasteners, flashings, and drainage trim get specified wherever warranty-critical performance is at stake. Aftermarket components only enter where they’re dimensionally and metallurgically compatible, and we’ll tell you up front which is which.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Sunnyvale
What drives the price on CGI work in Sunnyvale is the starting condition of the substrate and the layout constraints on your lot. Here are the realistic ranges we see for this market:
| Scope of Work | Typical Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation (CGI standing seam or exposed-fastener) | $15,000 – $40,000 |
| Roof Repair | $400 – $1,800 |
| Tile Roof Repair | $600 – $2,500 |
A low-pitch Eichler roof that needs full deck replacement and underlayment correction will land at the upper end. A flashing-and-fastener correction on a sound CGI assembly lands low. Every estimate includes a written line-item scope, photo documentation of what we found, and a clear answer on repair-versus-replace before we ask you to commit to anything. Call (833) 589-8103 to get your free estimate started.
Serving Sunnyvale, CA — Our Local Coverage Area
We’re based in the Sunnyvale area and also serve as a Sunnyvale General Contractor who knows this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Sunnyvale
No, not if the work touches a protected heritage oak or redwood’s root zone or requires staging within the setback. Sunnyvale’s tree ordinance requires a removal permit and often a replacement plan before protected trees can be disturbed. On many Eichler lots, that means the CGI panel layout, staging location, and delivery path get reworked around root-protection zones before we submit for the building permit. We handle that coordination as part of our scope, but the tree work is a separate city process. Call (833) 589-8103 and we’ll walk your lot and tell you exactly what applies – estimates are free.
Because Sunnyvale’s rain falls almost entirely between November and March, and low-slope roofs hold water at panel laps and penetrations long enough for worn sealant to fail. The rest of the year is dry, so the leak dries out and disappears before you notice it. The underlying cause is usually failed sealant at panel transitions, backed-out fasteners on the eave line, or a flashing detail that was never right to begin with. We find the source, correct the flashing and fastener line if the deck is sound, and pull the panel if the deck has taken water. For an exact diagnosis, call (833) 589-8103.
If the existing roof deck, underlayment, and framing are dry and structurally sound, a targeted repair makes sense. If the deck or sheathing has taken water, patching over the top just moves the failure to a different lap or penetration. In that case, a CGI standing seam system installed correctly – with the proper clips, thermal movement allowance, and flashing sequence – is a better investment than another round of repairs. We’ll cut a test section and show you what’s underneath before you decide. Call (833) 589-8103 and we’ll put it in writing.
Yes, when the drainage and weep details are installed per CGI’s specification. Sunnyvale’s dry, high-UV summers will pit and finish-fail aluminum frames fast if water sits in the channels. The frame itself isn’t the weak point; the skipped weep detail is. We reseal, clear the drainage path, and correct the flashing at the sill and head, which usually restores the frame for years before replacement enters the conversation.
No. We are an independent construction firm, not affiliated with, authorized by, or endorsed by CGI. Our credibility comes from years of specifying, installing, and correcting CGI building-envelope products on Bay Area projects. We read CGI’s published installation and detailing requirements and build to them, then document what we did at every layer. That independence also means we’ll tell you honestly when a repair makes more sense than a replacement, because we don’t have a quota to hit.
Service Areas Near Sunnyvale
Beyond Sunnyvale, we take on CGI work in our broader Sunnyvale service area, along with CGI service in Loyola and CGI service in Milpitas. We also cover Watsonville, Pajaro, Freedom, Interlaken, Las Lomas, and Amesti for homeowners who need CGI roof and wall system work done right the first time. If you’re not sure whether we cover your street, call and ask – the answer is usually yes.
Book Your CGI Service in Sunnyvale Today
If your CGI roof, wall system, or window assembly is giving you trouble in Sunnyvale or you need CGI in Santa Clara, call (833) 589-8103. We’ll get eyes on it, tell you what’s actually wrong, and give you a free written estimate. No pressure, no upselling – just a straight answer from a contractor who knows how these systems should have been built in the first place.
Written by Glen Sorrento, Owner at Seaside Contractors, serving Sunnyvale and the greater Bay Area.