Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Lexington Hills, CA | Seaside Contractors
We provide independent CWS cabinet, countertop, and kitchen remodeling service across Lexington Hills. We’re not a manufacturer service arm, and we’re not authorized by CWS. What we are is a full-scope general contractor that has spent years pulling CWS cabinetry apart and putting it back together in mountain homes where moisture, hillside movement, and one-lane roads punish every material decision. Call (833) 589-8103 for a free estimate.
Why Lexington Hills Residents Choose Us for CWS Service
Most remodeling crews don’t know a CWS frameless plywood box from a big-box particleboard special. Our team does, because we’ve been replacing, refacing, and rebuilding CWS cabinet runs throughout the Santa Cruz Mountains for years, including Los Gatos CWS service work. We carry a working knowledge of how CWS shaker doors, thermofoil skins, and quartz blanks hold up in Lexington Hills specifically, where winter damp settles into crawlspaces and summer sun bakes south-facing kitchen walls without shade.
Glen Sorrento, our owner, grew up around construction in Foster City and spent two decades working nearly every Peninsula project type before bringing that experience to mountain work. He’s the one who’ll tell you a cabinet door that looks fine in a showroom can swell and bind within two winters against a pier-and-post foundation. We bring that honesty to every Lexington Hills job.
Styles & brands we work with
Common CWS Construction Problems We Solve in Lexington Hills
- Thermofoil door skins lifting and peeling. Lexington Hills homes often sit unheated through damp winters, and the humidity works under thin thermofoil edges until they curl. We see it most on cabinet runs near kitchen windows and exterior walls with poor vapor barriers. We can replace individual doors or reface the full run, depending on box condition.
- MDF and particleboard boxes wicking moisture from crawlspaces. So many older Lexington Hills cabins sit on pier-and-post foundations with open, damp crawlspaces. Moisture rises into cabinet carcasses, swelling bottoms and throwing drawer tracks out of alignment. We replace swollen boxes with plywood-grain CWS carcasses that tolerate mountain humidity far better.
- Quartz and laminate seams separating. Hillside soils here expand and contract through wet winters and dry summers. Older cabins rack slightly, and seams that looked tight at install can open a sixteenth of an inch by spring. We re-set and re-bond seams, then check level before doing any finish work.
- Factory finishes checking on south-facing runs. Unshaded mountain summer sun hits kitchen cabinetry hard, and CWS painted MDF doors can craze or fade unevenly. We reface affected runs and can apply UV-stable finishes where the layout demands it.
- Drawer-track failures from seasonal racking. When a hillside home shifts, drawer slides bind and jump. We swap in quality aftermarket soft-close slides that outlast the originals and remain smooth even when the house isn’t perfectly square.
CWS Service in Lexington Hills: What Local Conditions Mean for Your Equipment
Lexington Hills’ one-lane private roads routinely block concrete trucks and cabinet delivery vehicles, so nearly every kitchen or bath job here has to be staged from a pump truck or a smaller box truck. That means measuring every opening, ordering exact cabinet dimensions, and dry-fitting everything before anything climbs the hill. We’ve watched too many contractors order standard 24-inch base cabinets, only to find the cabin’s actual wall has a 23-and-three-quarter gap that won’t take a standard unit, a mistake we also avoid on CWS service in Monte Sereno jobs. So we measure twice and stage smart. On a steep wooded lot off Bear Creek Road, our crew pulled a 1970s cabin kitchen’s CWS thermofoil doors, all peeled and swollen, through a tight side access, dry-fit new plywood-box units and a quartz top delivered on a small box truck before winter rain, then came back after the season to re-seal the seams the hillside had opened. That’s the rhythm of CWS work here: plan for the road, build for the movement.
CWS Models & Products We Service in Lexington Hills
We work on CWS frameless full-overlay plywood-box cabinets, shaker and flat-slab door styles in painted MDF and thermofoil, CWS quartz and granite countertop blanks, and CWS vanity and linen cabinet lines in solid-wood and plywood carcasses. When a match matters, we source genuine CWS replacement doors, drawer boxes, and hardware. When the original spec is the weak point, we recommend aftermarket hinges, slides, and levelers that outlast what the factory shipped. We recommend refacing or adding to sound CWS boxes, and full replacement only when carcasses have swelled or the layout cannot be salvaged, the same approach we take for CWS repair in Cambrian Park. Our local parts familiarity means most Lexington Hills service calls don’t wait on a second trip up the hill.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Lexington Hills
Pricing depends on cabinet condition, countertop material, and whether we’re refacing, replacing, or remodeling from the studs. Mountain access adds a staging charge when a full-size delivery truck can’t make the road, but it’s a known cost we plan for, not a surprise.
| Service | Typical Range in Lexington Hills |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Every line is quoted before we start, and our free estimate includes the site walk, measurements, and a written scope. Call (833) 589-8103 to schedule yours.
Serving Lexington Hills, CA — Our Local Coverage Area
We’re based in the Lexington Hills area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Lexington Hills
Usually not. Most roads in Lexington Hills are single-lane with tight switchbacks and no turnaround for a 26-foot box truck. We stage deliveries from a smaller box truck or pump truck at the nearest wide point, then transfer cabinetry in batches. We’ll confirm access during the free estimate and plan the staging with you before ordering. Call (833) 589-8103 if you want us to look at your specific road.
If the cabinet boxes are still square and dry, we can replace just the doors or reface the entire run for far less than a full tear-out. If the boxes have swelled from crawlspace moisture or the layout fights you every day, replacement makes more sense. We never sell a full kitchen when doors alone will do.
Yes. Lexington Hills’ seasonal soil expansion and contraction can separate seams and crack brittle materials. We install with flexible adhesive and leave expansion tolerance, then re-seal after the first wet season if the house has moved. A seam that shifts isn’t a failed forever; it’s a maintenance event on mountain ground.
Wildland-Urban Interface requirements touch exterior materials more than interior cabinets, but they still change how we sequence work: clearing defensible space before staging, using ignition-resistant materials for any exterior wall or deck we disturb, and keeping burn piles out of the picture during fire season. We handle the paperwork and the practical side.
For interior kitchen and bath work, generally not, unless you move or modify load-bearing walls, add square footage, or do site grading. If a hillside project touches drainage or retaining structures, county review is likely. We pull what’s needed and line up inspections so you’re not left guessing.
Service Areas Near Lexington Hills
We serve Lexington Hills and nearby communities including Watsonville, Pajaro, Freedom, Interlaken, and Amesti. Many of our clients find us through CWS sales & service work, but the mountain-specific planning we bring to the Lexington Hills service area carries over to every hillside job. We also handle CWS service in Ben Lomond and CWS service in Bonny Doon, where steep lots and narrow roads present the same access and movement challenges.
Book Your CWS Service in Lexington Hills Today
If your CWS cabinets are peeling, swelling, or fighting the hillside, call (833) 589-8103—we handle CWS repair in Scotts Valley too. We’ll walk the site, give you a written scope, and tell you plainly what the job needs before we talk materials.
Written by Glen Sorrento, Owner at Seaside Contractors, serving Lexington Hills and the Santa Cruz Mountains with full-scope general contracting.