Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Pacifica, CA | Seaside Contractors
We provide independent CWS cabinet and millwork service across Pacifica’s 94044 neighborhoods, and we also offer CWS service in San Bruno. We install, reface, and repair CWS Concord, Hartford, and custom cabinet lines, and we do it with a working knowledge of what fog, salt air, and steep bluff lots actually do to cabinetry over time. What makes our CWS work different here is simple: we plan for moisture before it becomes a problem. Call (833) 589-8103 for a free estimate on CWS service in Pacifica.
Why Pacifica Residents Choose Us for CWS Service
We’ve installed and retrofitted CWS cabinetry inside Pacifica’s mid-century stucco and redwood-sided homes for years. Those houses rarely have square walls. Raised foundations settle. Terraced lots shift. Glen Sorrento, our owner, grew up in Foster City’s Shell Cove and studied building construction technology at College of San Mateo before spending two-plus decades working Peninsula projects from waterfront decks to full kitchen remodels. That background means we walk into a Pacifica kitchen already thinking about the wall behind the cabinet run, not just the cabinet itself, and it’s why homeowners trust us for CWS repair in Broadmoor too.
We’re an independent CWS service provider. We don’t wear a manufacturer badge, and we don’t push parts we wouldn’t put in a coastal kitchen. We match hardware to the existing box, use factory-original CWS components where the line is still supported, and tell you straight when a swollen box or delaminated end panel is past saving. Learn more about our CWS sales & service approach.
Styles & brands we work with
Common CWS Construction Problems We Solve in Pacifica
- Swollen particleboard boxes at the toe-kick. Lower-tier CWS lines use particleboard and MDF box panels. In Pacifica’s fog-belt humidity, a slow leak at the dishwasher line or sink trap keeps the toe-kick damp, and those panels swell and crumble. We see this constantly in older coastal kitchens where the original cabinet run predates modern waterproofing.
- Rusted drawer glides and stiff hinges. Salt-laden onshore air gets into everything. On west-facing Pacifica kitchens, the drawer glides and hinges start corroding within a few seasons. Doors sag. Drawers stick. We replace with corrosion-rated hardware or factory CWS components where the line still exists.
- Racked cabinet boxes on raised foundations. Terraced lots and raised-floor homes settle unevenly. When the floor dips, the cabinet run racks out of square, door reveals go uneven, and countertop seams pull apart. We re-square the wall, shim correctly, and reset the run so it sits flat.
- Delaminated face frames and end panels. A winter roof or window leak wicks moisture behind the cabinet run. By the time anyone notices, the finished end panels and face frames are peeling. We trace the leak source first, then replace what cannot be saved.
- Countertop seam failure from movement. Pacifica homes move. When a cabinet box racks on a shifting lot, the countertop seam opens. We won’t lay new quartz over an unsound box. We fix the base, then set the stone.
CWS Service in Pacifica: What Local Conditions Mean for Your Cabinets
Pacifica’s coastal-bluff lots drain seaward and sit under year-round fog, so cabinet and millwork failures here usually trace back to moisture intrusion from the exterior envelope. That’s the insight most generic cabinet advice misses. A cabinet box does not swell on its own. It swells because a window flashing failed, a deck ledger wicked water into the wall, or a roof boot rotted out above the kitchen. In the coastal-bluff neighborhoods along the city’s western edge, we regularly open up a CWS run and find the real problem is two feet away, behind the drywall. That’s why our CWS work in Pacifica starts with the exterior. If the water path isn’t fixed, the new cabinets die the same death as the old ones. When we serve the broader Pacifica service area, we bring that same exterior-first discipline to every job.
CWS Models & Products We Service in Pacifica
We service the full CWS lineup that flows through Pacifica kitchens: the Concord ready-to-assemble all-plywood line, the Hartford assembled shaker and raised-panel series, and the custom and semi-custom all-wood programs sold through dealers. Our approach on parts is straightforward. We match cabinet hardware to the existing box. Factory-original CWS glides, hinges, and shelf clips where the line is still supported. Quality aftermarket soft-close equivalents when it isn’t. We keep common corrosion-rated hardware on hand for fast Pacifica turnarounds, because waiting a week for a hinge when the fog is eating your kitchen isn’t how we like to work.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Pacifica
What does CWS cabinet and counter work actually cost in Pacifica? Here’s the honest math. Job size, box condition, and material tier drive the number. A simple countertop swap on sound boxes lands at the low end. A full kitchen remodel with rotted box replacement, wall re-squaring, and new stone lands at the top. Every estimate is free and itemized, so you see exactly what goes where.
| Service | Typical Range in Pacifica |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
If the numbers feel wide, that’s because Pacifica houses are wildly inconsistent. A 1950s bluff-edge kitchen with a racked wall and rotted end panels costs more to do right than a 1990s tract kitchen on a flat lot. Call (833) 589-8103 for an exact quote. Estimates are free, and we’ll walk the job with you before we price it.
Serving Pacifica, CA — Our Local Coverage Area
We’re based in the Pacifica area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Pacifica
Yes, but only if the moisture path behind them is addressed first. The cabinets themselves are not the weak point. The exterior envelope is. When we install CWS in Pacifica, we check the window flashing, roof drainage, and deck ledgers before the first box goes in. That’s the difference between a kitchen that lasts 20 years and one that rots in five.
Almost certainly. Salt-laden onshore air corrodes unsealed metal hardware quickly. We see it worst on west-facing kitchens where the prevailing wind pushes salt straight at the cabinet pulls. The fix is corrosion-rated replacement glides and hinges. For exact parts and labor, call (833) 589-8103 and we’ll schedule a look.
Yes, and we do it often. If the boxes are square and dry, refacing with new doors, drawer fronts, and end panels gives you a factory-fresh look at a fraction of replacement cost. The catch is honesty: on fog-belt cabinets, we’ll tell you plainly when a water-swollen box or delaminated end panel means refacing would be throwing good money after bad.
They need a wall check. Bluff-edge lots drain seaward and shift more than inland lots, so we verify the wall is flat and the floor is stable before we hang cabinets or set stone. On homes near the coastal-bluff edge, we also confirm there’s no active water intrusion behind the run. If there is, we flag it before we build on top of it.
Cabinet installation runs $4,000 to $13,000, countertops $2,000 to $6,500, and a full kitchen remodel $14,000 to $45,000 depending on scope and box condition. Pacifica’s moisture problems don’t add a hidden surcharge; they add visible repair work we’ll show you before we price it. Call (833) 589-8103 for a free estimate.
Service Areas Near Pacifica
We serve Pacifica and the surrounding coastal and Peninsula communities. Our team regularly works in Daly City, San Bruno, South San Francisco, and Half Moon Bay. For CWS work south of the city, see our CWS service in Brisbane and CWS service in Colma pages.
Book Your CWS Service in Pacifica Today
If your CWS cabinets are sticking, swelling, or sitting out of square, we’ll come look. Same-day scheduling is often available for Pacifica jobs. Call (833) 589-8103 and Glen will figure out what the job actually needs. Then we’ll talk materials.
Written by Glen Sorrento, Owner at Seaside Contractors, serving Pacifica and the greater Peninsula, including our General Contractor in Pacifica.