Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Construction in Tiburon, CA | Seaside Contractors
We provide independent Kohler installation and service across Tiburon, from full kitchen remodels built around a Whitehaven apron sink to shower valve rebuilds in hillside bathrooms. For larger projects, see our Home Remodeling in Tiburon. What makes our Kohler work different here is simple: we know how these fixtures behave on sloped lots, in salt air, and after hand-carry up a driveway a delivery truck can’t climb. Call (833) 589-8103 to talk through your project.
Our Kohler sales & service experience spans the cast-iron, vitreous, and trim lines you’ll actually find specified in Marin County remodels. We’re an independent contractor, not affiliated with or authorized by Kohler, so our recommendations aren’t filtered through a manufacturer’s program. They’re filtered through what works in a steep, bay-exposed Tiburon house.
Why Tiburon Residents Choose Us for Kohler Service
We’ve installed and serviced Kohler fixtures across the Tiburon service area long enough to know how their cast-iron baths, Comfort Height toilets, and shower valves actually behave in hillside homes, not just how they look in a showroom. That distinction matters more in Tiburon than almost anywhere else in Marin. A Kohler Whitehaven sink that sits perfectly flat in a San Rafael rancher can rock and leak in a Tiburon kitchen where the floor follows the hill.
Glen Sorrento, our owner, grew up watching lagoon-side homes in Foster City get built and rebuilt, then spent more than two decades working through the construction types the Peninsula throws at a contractor. He treats a Purist shower valve with the same attention as a GAF roof system, because both have to hold up to the same marine air. It’s the same discipline we bring to Kohler in Chinatown and throughout the Bay. We stock genuine Kohler OEM cartridges, flush valves, and trim for fast Tiburon turnaround, and we’ll use aftermarket only on wear items where the OEM premium buys nothing. Let’s figure out what the job actually needs – then we’ll talk materials.
Styles & brands we work with







Common Kohler Construction Problems We Solve in Tiburon
- Cast-iron apron sinks rocking on sloped kitchen floors. Whitehaven and Bellhaven sinks are heavy and unforgiving. If the cabinet run or floor isn’t perfectly level on a sloped-lot Tiburon kitchen, the sink rocks, the seal fails, and water tracks into the cabinet base. We shim and bed these properly, checking level before the sink ever gets set.
- Stiff or dripping Purist and Artifacts shower valves. Kohler ceramic cartridge valves scale and seize with Marin’s harder water and long periods of low use in second homes. The handle gets stiff, or it drips at the shower head. We rebuild these with OEM cartridges rather than telling you to replace the trim.
- Hairline cracks in one-piece Comfort Height toilets. These ship from the mainland and come off the truck intact less often than you’d think. By the time they’re hand-carried up a steep Tiburon access, a hairline crack can appear and show up later as a slow seep at the base flange. We inspect before setting.
- Pitted chrome and brushed-nickel finishes on bay-exposed walls. Salt air and wind-driven rain reach bathroom and kitchen windows that stay open in summer. Kohler finishes pit faster on those walls than they would inland. We’ll recommend the right finish for the exposure, not just the look.
- Older cast-iron tubs losing their glaze. On older Kohler cast-iron and vitreous fixtures, refinishing or a valve rebuild usually beats replacement. On cracked ceramic or discontinued trim, we’re honest that replacement is the better money.
Kohler Service in Tiburon: What Local Conditions Mean for Your Equipment
Tiburon’s hillside streets above downtown and along the Old Rail Trail are so narrow and steep that many Kohler deliveries, the heavy cast-iron sinks and one-piece toilets especially, can’t come off a standard truck at the site. They get hand-carried or craned up in stages and inspected for freight damage before we set them. A one-piece Comfort Height toilet that arrives cracked from freight doesn’t fail in the showroom. It fails as a slow seep at the base flange after install, in a house where the floor already slopes toward the view. The same access reality drives a lot of Tiburon project cost, not the fixture itself but how you get it up the hill and whether it survives the trip.
On a split-level remodel off a hillside street above downtown, our crew installed a Kohler Whitehaven apron sink into a run where the floor had a slight slope. We leveled and shimmed the cabinet base and set the sink in a full bed of sealant so it sat dead flat. The Purist shower valve in the same house had a stiff handle from scaled cartridges, which we rebuilt with OEM parts rather than replacing the trim. Delivery up the narrow access was staged by hand, and we caught a hairline crack on a Comfort Height toilet before it ever got set. That’s Tiburon Kohler work.
Kohler Models & Products We Service in Tiburon
We work across the Kohler lines you’ll actually find in Tiburon homes: Whitehaven and Bellhaven cast-iron apron-front kitchen sinks; Memoirs and Devonshire toilet and lavatory collections; Purist and Artifacts shower and bath trim; and Bancroft and Archer Comfort Height toilets. For anything under warranty-adjacent or finish-critical, we source genuine Kohler OEM cartridges, flush valves, and trim. We keep a working stock of common valve parts local to Tiburon so a shower rebuild doesn’t wait on a warehouse. On older cast-iron and vitreous fixtures, refinishing or a valve rebuild often beats replacement. On cracked ceramic or discontinued trim, replacement is the better money, and we’ll tell you that directly.
See the difference
Before
After
Before
After
Before
AfterKohler Service Pricing in Tiburon
Here’s what Kohler-related work typically runs in Tiburon. The ranges reflect local access conditions, not just the fixture. A hillside carry adds labor; so does marine-air finish preparation.
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Cabinet Installation | $4,000 – $13,000 |
A free estimate includes a look at your access, your floor level, and your existing valve condition. Call (833) 589-8103 to schedule one.
Serving Tiburon, CA — Our Local Coverage Area
We’re based in the Tiburon area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Kohler Construction in Tiburon
Yes, but only if the cabinet base is leveled and shimmed first and the sink is set in a full bed of sealant. A Whitehaven is heavy and unforgiving; on a sloped-lot floor it will rock, the seal will fail, and water will track into the cabinet base. We level the run before the sink ever gets set. Call (833) 589-8103 to schedule a free estimate.
Almost always, the ceramic cartridge valves have scaled with Marin’s harder water or seized from long periods of low use in a second home. The fix is a cartridge rebuild with OEM parts, not a trim replacement. That’s usually a same-day job once we have the valve opened. Call (833) 589-8103 for an exact quote.
We stage the delivery by hand or crane, depending on the access. On Tiburon’s hillside streets above downtown and along the Old Rail Trail, standard delivery trucks often can’t reach the site. We inspect every one-piece toilet and cast-iron sink for freight damage before setting it. Call (833) 589-8103 and we’ll walk you through what your specific access requires.
Yes. Chrome and brushed-nickel finishes pit faster on bay-exposed walls where salt air and wind-driven rain reach windows that stay open in summer. We’ll recommend the right finish for the exposure, not just the look you like in the showroom. Call (833) 589-8103 to schedule a free estimate.
On older cast-iron and vitreous fixtures, refinishing or a valve rebuild usually beats replacement. Cast-iron tubs hold their structure for decades; the surface is what wears. On cracked ceramic or discontinued trim, replacement is the better money. Call (833) 589-8103 and we’ll give you a straight answer based on your specific fixture.
Service Areas Near Tiburon
Our Kohler work extends beyond Tiburon to the neighboring communities of Belvedere, where hillside access is even tighter, and Marin City, where salt air and steeper grades present similar challenges. We also serve Kohler service in Belvedere and Kohler service in Marin City directly.
Book Your Kohler Service in Tiburon Today
We’re scheduling Kohler installations and service across Tiburon now. Call (833) 589-8103 for a free estimate, and we’ll send Glen or a senior crew lead to look at your access, your floor level, and your existing fixtures.
Written by Glen Sorrento, Owner at Seaside Contractors, serving Tiburon and the Tiburon Peninsula.