Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Boulder Creek, CA | Seaside Contractors
If you own a Mr-Glass shower enclosure, glass panel, or mirror system in Boulder Creek, you already know how fast seals fail, rollers bind, and glass pulls out of plumb in a redwood canyon. Seaside Contractors is an independent Mr-Glass service provider, not manufacturer-affiliated or authorized, serving Boulder Creek, Mr-Glass service in Brookdale, and the wider Santa Cruz Mountains. We know exactly how these units behave under fog drip, freeze cycles, and shifting pier-and-post floors. Call (833) 589-8103 for a free estimate.
Why Boulder Creek Residents Choose Us for Mr-Glass Service
We’ve installed and repaired Mr-Glass frameless sliding shower doors, semi-frameless pivot enclosures, custom-cut tempered glass panels, and decorative mirrors across Boulder Creek for years. That product familiarity matters when a 1970s redwood cabin on a steep lot starts moving with the seasons. Glen Sorrento, our owner, studied building construction technology at College of San Mateo and has spent more than two decades working through nearly every project type the Santa Cruz Mountains throw at a contractor, including Mr-Glass repair in Ben Lomond. He’s the guy who can look at a failed Mr-Glass track and tell you whether it’s a seal problem or a framing problem before he takes the glass off.
We use OEM-compatible Mr-Glass hinges, rollers, seals, and channel hardware where those parts carry load or water seal, and quality aftermarket glass where it’s a straight swap. We keep common Mr-Glass replacement parts staged so Boulder Creek service calls don’t drag into multi-week waits. Most importantly, we don’t slap glass on a wall that’s still moving. On older Boulder Creek cabins, that honesty saves you from paying for the same repair twice. Let’s figure out what the job actually needs, then we’ll talk materials.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Boulder Creek
- Mold and rot in Mr-Glass seals and tracks. Fog drip and constant redwood-shade humidity push moisture into the silicone seals and channels of frameless shower enclosures. The glass stays clear while the channel underneath turns black and soft. We pull the glass, kill the mold, replace the seal bed, and re-hang the enclosure clean.
- Binding rollers and stressed pivot hinges from out-of-plumb walls. Steep pier-and-post cabin floors and narrow canyon-road hauling mean Mr-Glass panels often settle slightly off true. A 1/8-inch drift over five feet makes a roller bind and a pivot hinge groan. We re-shim and re-hang rather than force the hardware.
- Cracked or pulling Mr-Glass frames on single-wall redwood interiors. Older Boulder Creek cabins with non-conforming wall framing and single-wall redwood shift seasonally. A rigid Mr-Glass enclosure frame can crack at the corner or pull away from the tile when the wall moves. We stabilize the framing behind the glass before we reset it.
- Hard-water etching and seal failure on exterior bathroom walls. Winter freeze events plus poorly vented bathrooms etch Mr-Glass surfaces and break the wall junction seal, especially where a heated interior meets a cold exterior wall. We re-seal, re-vent where possible, and match the glass coating to the moisture load.
- Unpermitted redwood additions that surface mid-project. Many older cabins along Highway 236 hide unpermitted additions. When one surfaces during a remodel, every Mr-Glass panel measurement changes. We re-measure before ordering any glass so you’re not stuck with a panel that doesn’t fit the final wall.
Mr-Glass Service in Boulder Creek: What Local Conditions Mean for Your Equipment
County fire-safe and defensible-space rules are enforced more strictly on Boulder Creek’s narrow canyon roads than in nearby towns. That shapes how Mr-Glass glass and mirror work gets sequenced. On a Highway 236 remodel, mirror and shower-glass installation often has to wait until roof, venting, and defensible-space inspections clear. Those inspections can trigger re-roofing, eave-boxing, or vent replacement that changes interior wall dimensions. We sequence our Mr-Glass measurements after the fire-safe inspections pass, not before. And if a remodel uncovers an unpermitted redwood addition, which is common in this housing stock, we re-measure every Mr-Glass panel before we order. Glass cut to a pre-existing wall often won’t fit the wall the county makes the homeowner legalize. That’s a Boulder Creek-specific sequencing problem no flatland glass shop deals with.
Mr-Glass Models & Products We Service in Boulder Creek
We service the full Mr-Glass product range: frameless sliding shower door systems, semi-frameless pivot shower enclosures, custom-cut tempered glass panels, mirrors, and decorative glass installations. Our parts approach is simple. Where Mr-Glass OEM hinges, rollers, seals, or channel carry load or make a water seal, we use OEM. Where aftermarket glass or hardware is a true straight swap and the performance is identical, we tell you and let you choose. On 1960s and 70s canyon cabins, we’ll often recommend re-hanging or re-sealing an existing enclosure rather than replacing it, at least until the wall and floor are stable. Replacement on a moving wall just means replacing it again next year.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Boulder Creek
Mr-Glass shower and glass work in Boulder Creek ranges depending on the enclosure type, glass thickness, and how many framing corrections the cabin needs. Here’s how the common line items shake out:
| Service | Typical Boulder Creek Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Roof Repair (often sequenced with glass work) | $400 – $1,800 |
The range depends on whether your wall needs re-framing, whether the pan needs re-flashing, and whether fire-safe inspection sequencing adds a step. A free estimate from us includes an in-person look at the wall, floor, and existing enclosure, not just a phone number you’ll never hear from again. Call (833) 589-8103 to set one up.
Serving Boulder Creek, CA — Our Local Coverage Area
We’re based in the Boulder Creek area and know this community well, and we also offer Mr-Glass repair in Lompico. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Boulder Creek
Yes, but the wall has to be checked first. Single-wall redwood interiors move with the seasons, and a rigid Mr-Glass frame will crack or pull away if you anchor it to a stud that’s still shifting. We check plumb, stabilize where needed, and only then hang the glass. If rot or unpermitted framing shows up, that gets addressed before the enclosure goes in.
Fog drip and constant shade humidity saturate the track and seals, while freeze events force the metal and silicone to expand and contract faster than in flatter, drier towns. A Mr-Glass enclosure in Boulder Creek is dealing with moisture loads a Monterey Bay enclosure never sees. We replace with OEM seals and set the track to drain, which is the part most installs skip.
It often does, especially on highway-corridor remodels where the county enforces defensible-space and roof venting rules harder than in nearby towns. If the inspection triggers a re-roof or vent change, the wall dimension you measured for glass changes with it. We sequence glass measurements after those inspections clear. Call (833) 589-8103 if you’re mid-remodel and trying to figure out whether to order glass now or wait.
A heated bathroom interior against a cold exterior wall is a condensation machine. That moisture wicks under Mr-Glass seals, freezes at the junction, and breaks the silicone bond over a season or two. We re-flash the pan, re-set the wall junction with freeze-rated sealant, and where the bathroom allows, improve venting so the enclosure isn’t fighting its own humidity.
For hinges, rollers, and wall channel, yes. Those parts take the load and make the water seal, and aftermarket versions don’t match the Mr-Glass spec on a shifting cabin wall. For glass panels and trim, a quality aftermarket piece is often a straight swap and costs less. We’ll show you the line and let you decide. Call (833) 589-8103 for an exact quote on your enclosure.
Service Areas Near Boulder Creek
We serve Boulder Creek and the surrounding Santa Cruz Mountains communities, including Ben Lomond, Felton, Brookdale, and the San Lorenzo Valley corridor. Our full Boulder Creek service area page shows the ZIP codes and roads we cover. For Mr-Glass work specifically, we also handle Mr-Glass service in Cambrian Park and Mr-Glass service in Monte Sereno. For a broader look at what we do with this product line, see our Mr-Glass sales & service page.
Book Your Mr-Glass Service in Boulder Creek Today
If a Mr-Glass enclosure is binding, leaking, or pulling off the tile in Boulder Creek or you need Mr-Glass in Felton, call (833) 589-8103. We’ll come out, look at the wall and the glass, and give you a free estimate that accounts for the canyon, the moisture, and the shifting floor, not just the glass.
Written by Glen Sorrento, Owner at Seaside Contractors, serving Boulder Creek and the Santa Cruz Mountains.