Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Broadmoor, CA | Seaside Contractors
We provide independent Mr-Glass service across Broadmoor, CA – shower enclosures, mirror walls, tub doors, and bath glass rebuilt to handle the fog, salt air, and older wall framing this 94015 pocket throws at them. If you’re nearby, we also offer Mr-Glass repair in Colma. The thing that makes our Mr-Glass work here different is simple: we understand Broadmoor is unincorporated San Mateo County land, so every permit and inspection runs through the county, not Daly City, even though your address reads Daly City. Call (833) 589-8103 for a free estimate on Mr-Glass repair or replacement in Broadmoor.
We’re the Mr-Glass sales & service team at Seaside Contractors – an independent general contractor, not a manufacturer showroom. We’ve spent years tearing out and rebuilding Mr-Glass enclosures in Broadmoor’s post-war tract homes, so we know how the brand’s hardware ages in salt air and foggy coastal conditions. We are not authorized, sponsored, or endorsed by Mr-Glass.
Why Broadmoor Residents Choose Us for Mr-Glass Service
Most of Broadmoor’s housing stock went up in the 1940s and 1950s, and the bathrooms were never built for the moisture load this coastal band delivers. Fog sits on Broadmoor streets most summer mornings, and wind-driven salt air works its way into aluminum frames and hinge plates. We know which Mr-Glass hardware holds up here and which fails fast. That’s not a guess – it’s from pulling apart enclosures on these exact lots for years.
We stock OEM Mr-Glass hinges, rollers, sweeps, and seals for models still supported, and we use quality aftermarket stainless or brass hardware when OEM parts are discontinued. Matching metal and glass thickness matters more than the label. Glen Sorrento, our owner, grew up in Foster City watching lagoon-side homes get built and rebuilt, studied building construction technology at College of San Mateo, and has spent more than two decades working through the project types the Peninsula throws at a General Contractor in Broadmoor. Let’s figure out what the job actually needs – then we’ll talk materials.
One contractor. Every trade. That means your Mr-Glass shower gets framed, waterproofed, and finished by the same team that’s accountable for the whole bathroom.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Broadmoor
- Creeping edge chips and hinge-plate corrosion on frameless enclosures. Mr-Glass frameless 3/8″ and 1/2″ enclosures with exposed-edge hinges develop edge chips after years of wind-driven coastal moisture and salt air. The hinge plates corrode, then the door sweep leaks. We replace the hardware and, when the glass is compromised, tell you straight that replacement beats patching.
- Bypass slider doors that bind and jump off track. Broadmoor’s small 1940s and 1950s bathrooms were built on narrow original tile curbs that were never level. Bypass sliders get shimmed instead of reset, so rollers wear out fast and the track binds. We reset the curb properly before installing new rollers.
- Pitted semi-frameless aluminum frames with chalked anodized finish. Fog sits on the bottom rail of semi-frameless Mr-Glass doors in Broadmoor, and the aluminum pits and the finish chalks. Seals shrink back, water escapes onto narrow-lot subfloors. We replace frames and upgrade seals to marine-grade materials.
- Hazed and desilvered custom mirror walls. In Broadmoor’s tight windowless baths, condensation builds and Mr-Glass mirror walls haze and desilver at the edges. Adhesive-mounted panels loosen in the older walls. We rebuild mirror walls with proper backer board and edge sealing.
- Leaks at the tub-shower door sweep on post-war subfloors. Broadmoor’s homes sit on subfloors that were never designed for modern shower use. When a Mr-Glass tub door sweep fails, the water goes straight into the hallway. We rebuild the sweep, reseat the frame, and check the subfloor before it becomes a framing problem.
Mr-Glass Service in Broadmoor: What Local Conditions Mean for Your Equipment
Broadmoor is unincorporated San Mateo County land wrapped inside Daly City. A glass-shower or bath remodel permit for a 94015 Broadmoor address must go through the county, not Daly City – and county inspectors scrutinize the tight-lot drainage and older wall framing that Mr-Glass enclosures get anchored into. We’ve seen a Daly City permit bounce back for a Broadmoor address enough times to know the drill cold. The county also flags narrow-lot drainage and retaining-wall conditions that Daly City’s newer subdivisions don’t have. That matters for shower work because the waterproofing behind the glass has to stand up to an inspector who’s specifically looking for moisture damage in 70-year-old framing. We pull the county permit, pass the inspection, and build the waterproofing so it holds.
On a mid-century Broadmoor tract home off the tightly packed streets inside 94015, we replaced a failing 1990s semi-frameless slider whose bottom rail had pitted through from fog and salt air. We reset the out-of-level tile curb, installed a Mr-Glass frameless 3/8″ enclosure with marine-grade stainless hinges, and sealed it against the older framing – and the homeowner noted it was the first time the shower didn’t leak onto the hall floor.
Mr-Glass Models & Products We Service in Broadmoor
We service the full Mr-Glass residential line: Frameless Glass Shower Enclosures in 3/8″ and 1/2″ tempered glass, Semi-Frameless Sliding Shower Doors, Custom Mirrors and Mirror Walls, and Bypass and Pivot Tub-Shower Doors. Whether it’s a walk-in shower enclosure, a tub-to-shower conversion, or a mirror wall rebuild, we stock OEM hinges, rollers, sweeps, and seals locally for fast Broadmoor turnaround. When OEM parts are discontinued, we use aftermarket stainless or brass matched to the original metal and glass thickness – never a mismatched hinge that accelerates wear. If a frame is pitted through or the glass is edge-chipped, we’ll tell you honestly that replacement beats patching, because compromised tempered glass won’t hold.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Broadmoor
What you’ll pay depends on the enclosure type, glass thickness, and whether the curb and framing need work first. Here’s what Broadmoor homeowners can expect:
| Service | Broadmoor Price Range |
|---|---|
| Frameless Glass Shower Enclosure (Walk-In Shower Installation) | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
The number moves based on whether we’re resetting a curb, reframing a wall, or pulling a county permit. A free estimate includes a walkthrough of the enclosure, the framing behind it, and a written line-item quote. Call (833) 589-8103 for exact pricing – estimates are free.
Serving Broadmoor, CA — Our Local Coverage Area
We’re based in the Broadmoor area and know this community well, and we also provide South San Francisco Mr-Glass service. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Broadmoor
Yes, in most cases. Broadmoor is unincorporated San Mateo County land, so a shower or bath remodel permit for a 94015 address must go through the county, not Daly City – even though your address reads Daly City. We pull the permit, coordinate the inspection, and pass it. Call (833) 589-8103 and we’ll tell you what your specific job requires.
Salt air and fog accelerate corrosion on aluminum frames and hinge plates, especially on homes in Broadmoor’s tight coastal band. Wind-driven moisture works into seals and hardware, and 70-year-old wall framing moves, which stresses the glass. The fix is marine-grade stainless hardware and proper sealing, not another round of cheap hinges.
Usually, yes. The key is resetting the out-of-level tile curb first – most original Broadmoor curbs were never level, and a frameless enclosure won’t sit right on one. We do that before the glass goes in. If the space is genuinely too tight, we’ll say so and show you a semi-frameless option that works.
Most Broadmoor projects run $3,000 to $12,000 depending on enclosure type, glass thickness, and whether the curb and framing need resetting. A tub-to-shower conversion typically lands between $3,500 and $10,000. Call (833) 589-8103 for a written quote – estimates are free.
We stock OEM Mr-Glass hinges, rollers, sweeps, and seals for models still supported. When OEM parts are discontinued, we use quality aftermarket stainless or brass matched to the original metal and glass thickness – because the match matters more than the label. We’ll never install a mismatched part that accelerates wear.
Service Areas Near Broadmoor
While this page covers Broadmoor service area work, we also run Mr-Glass service calls in nearby communities. That includes Mr-Glass service in Daly City for the surrounding neighborhoods, and Mr-Glass service in Noe Valley for clients on the north side of the city.
Book Your Mr-Glass Service in Broadmoor Today
Ready to stop the fog-driven leaks and get your Mr-Glass enclosure rebuilt right? Call (833) 589-8103 to schedule your free estimate in Broadmoor, CA, or ask about our Mr-Glass service in Pacifica. We’ll walk the job, check the framing, and give you a straight answer on what it takes.
Written by Glen Sorrento, Owner at Seaside Contractors, serving Broadmoor and the surrounding San Mateo County communities.