Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in San Mateo, CA | Seaside Contractors
We service and install Mr-Glass shower enclosures and glass systems across San Mateo, and the one thing that separates our work here is this: we know how Peninsula remodels stress these enclosures. Most San Mateo homes are 1940s – 1960s single-story stucco tract houses, so the majority of Mr-Glass installs we touch go into second-story additions and rear extensions where fresh framing moves. That movement, not age, is what throws a frameless door out of true in year one. Call (833) 589-8103 for a free estimate.
Why San Mateo Residents Choose Us for Mr-Glass Service
We run Mr-Glass sales & service as an independent contractor. That matters because our recommendations come from watching these enclosures perform through hundreds of San Mateo County remodels, not from a catalog spec sheet. Glen Sorrento grew up in Foster City and studied building construction technology at College of San Mateo, and he’s spent two-plus decades working through nearly every project type the Peninsula throws at a contractor. When a Mr-Glass door drags on a curb in Baywood, we know whether the culprit is the hinge, the sweep, or the wall behind it. We source genuine Mr-Glass hinges, handles, sweeps, and seals when lead times allow, and we use quality aftermarket hardware where specs match, so a worn hinge doesn’t force a full enclosure replacement. We’re not affiliated with or authorized by Mr-Glass. We’re just the crew San Mateo homeowners call when they want one accountable team on the job.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in San Mateo
- Pitted hinges and handle mounts from marine-layer humidity. San Mateo sits right in the fog belt. When a Mr-Glass enclosure sits on a poorly drained or unsealed shower curb, damp air accelerates corrosion at the pivot pins, hinges, and handle mounts. We see this constantly in older bathrooms where the enclosure was set over aging substrate.
- Doors that sag or won’t close flush after a second-story addition settles. New walls and studs shift. A Mr-Glass hinged enclosure that was square at install can start dragging or binding within months. Re-shimming the hinge jamb and checking the blocking behind it usually restores the swing without replacing the glass.
- Water migration at the bottom rail and wall junction. Failed silicone and worn sweep seals let water move into tile backer and adjacent drywall. In San Mateo’s damp climate, that moisture doesn’t dry out on its own. It feeds mold behind the wall. We replace the seals and re-bed the junction before the substrate rots.
- Stress cracks and edge chips in tempered panels. Over-torqued clamps from a previous installer, plus grab bars or shower valves placed too close to the glass edge, create stress points. Edge chips in tempered glass can’t be repaired. If the chip is at the edge, replacement is the honest call.
- Sliding bypass tub-shower doors that jump their tracks. This shows up in San Mateo’s older single-story homes where floors have settled over decades, leaving tub decks slightly out of level. We re-level the track, replace worn rollers, and often solve it without touching the glass.
Mr-Glass Service in San Mateo: What Local Conditions Mean for Your Equipment
Here’s a pattern most pages won’t name: San Mateo’s housing stock is dominated by 1940s – 1960s single-story stucco tract homes on small lots. That means nearly every Mr-Glass enclosure we install goes into a second-story addition, a rear extension, or a full gut remodel where the bathroom’s framing and curb are freshly built. Fresh framing moves. A new stud wall that settles as little as 3/16 of an inch out of plumb is enough to make a frameless hinged door drag on its curb or gap at the strike jamb. In a city like Palo Alto or Menlo Park you’re more likely to see tear-downs and full custom builds with steel moment frames. In San Mateo, you’re working with wood framing over original 60-year-old foundations, which is why our General Contractor in San Mateo team plans every install carefully. That’s the difference. When we set a Mr-Glass panel in a Laurelwood hillside home, we’re also thinking about the slope behind the wall: hillside additions on engineered foundations can experience differential settlement, which means the enclosure needs blocking and shim points designed to accommodate a little movement. A generic Mr-Glass page won’t mention that. A generic San Mateo page won’t either.
Mr-Glass Models & Products We Service in San Mateo
We work on the full Mr-Glass product line: frameless hinged shower door enclosures in both 3/8″ and 1/2″ glass, Neo-Angle and Neo-Round corner enclosures, sliding and bypass tub-shower glass doors, and custom-cut glass panels for walk-in and curbless showers. For repair work, we keep common sweep seals, hinges, and handle sets stocked locally so San Mateo clients aren’t waiting on a warehouse. If your panel is out of square with the opening or the glass is edge-chipped, replacement is the right call. For worn hardware, seals, and slight alignment issues, repair almost always makes more sense. Let’s figure out what the job actually needs – then we’ll talk materials.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in San Mateo
Ballpark pricing helps you plan before you call. These are the ranges we quote most often in San Mateo:
| Service | Typical Range |
|---|---|
| Frameless Glass Shower Enclosure (Walk-In Shower Installation) | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
What drives the number is the same thing that drives every San Mateo remodel: whether the substrate is sound, whether the rough opening is square, and whether we’re working on a ground floor or a second-story addition with more variable framing. A free estimate with us means we look at all of that before we quote. Call (833) 589-8103 and we’ll get you a written line-item number.
Serving San Mateo, CA — Our Local Coverage Area
We’re based in the San Mateo area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in San Mateo
In San Mateo, it’s usually the wall. Most of our Mr-Glass enclosures sit in second-story additions or rear extensions where the framing has moved slightly since install. The glass itself rarely warps. We check the hinge jamb, the blocking behind it, and the bottom sweep before we ever suggest new glass. Call (833) 589-8103 and we’ll diagnose it in one visit.
It’s the marine layer. San Mateo’s fog belt keeps bathroom surfaces damp for hours each morning, and if your shower curb isn’t draining or the enclosure sits against an unsealed surface, that moisture settles on the hinges, pivot pins, and handle mounts. We see accelerated corrosion in bathrooms where the fan runs for ten minutes and quits. The fix is usually replacement hardware plus correcting the drainage or ventilation issue behind it. For homeowners near the water, our Foster City Mr-Glass service sees this same pattern.
You can absolutely replace just the sweep and seal, and we do that regularly in San Mateo. Worn sweeps are one of the most common repair calls we get. If the glass is intact and the track is level, a new sweep and a re-bed of the silicone at the wall junction usually solves the leak. Call (833) 589-8103 for an exact quote on your specific door.
No. Spare-the-air days restrict things like wood burning and certain outdoor construction activities. Installing a shower enclosure inside your San Mateo home doesn’t fall under that restriction. We schedule indoor glass work year-round regardless of air-quality burn bans.
Plan for the slope. Laurelwood sits on hillside terrain where engineered foundations and retaining walls are standard, and differential settlement can affect the framing behind your shower. That means the Mr-Glass panel needs blocking and shim points designed to accommodate slight movement. We also verify the curb drains properly before the enclosure goes in, because any trapped water on a hillside bathroom will find the lowest point and sit there. Call (833) 589-8103 and we’ll walk your site before anything gets ordered.
Service Areas Near San Mateo
While most of our Mr-Glass work happens right in San Mateo, we also serve San Mateo service area clients across the nearby Peninsula. That includes Mr-Glass service in El Granada on the coast and Mr-Glass service in Hillsborough just up the road. Need service elsewhere in San Mateo County? Ask us. We’ll tell you straight if it’s in our range.
Book Your Mr-Glass Service in San Mateo Today
If you’re dealing with a leaking, pitted, or misaligned Mr-Glass enclosure, don’t wait for the water to find the drywall. Call (833) 589-8103 and we’ll schedule your free estimate. We’ll look at the enclosure, the framing behind it, and the drainage, then give you a straight answer on repair versus replacement.
Written by Glen Sorrento, Owner at Seaside Contractors, serving San Mateo and the surrounding Peninsula.