Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Felton, CA | Seaside Contractors
We install and repair Tremron hardscape systems across Felton as an independent contractor, and offer Tremron in Scotts Valley too — the job here is rarely just laying pavers. The terrain, the winter rain, and the county’s wildland-urban interface rules all shape how Tremron pavers and walls have to be built if they’re going to survive. If you’re dealing with a cracked, heaved, or washed-out Tremron paver driveway or patio in Felton, call (833) 589-8103 for a straight assessment and a free estimate.
We’re not affiliated with or authorized by Tremron. What we are is a general contractor that has installed and repaired enough Tremron paver driveways, retaining walls, and patios on sloped Santa Cruz Mountains lots to know where the brand’s products fail, why, and what actually fixes them. For Tremron sales & service questions, or to walk your site with someone who understands both the material and the mountain, call us.
Why Felton Residents Choose Us for Tremron Service
Most hardscape crews in this area can lay pavers on a flat backyard. Felton is not that job. Our work here regularly means rebuilding failed paver bases on slopes, daylighting runoff that saturates wall backfill, and coordinating with the fire-hardening and defensible-space work that county review flags on nearly every project in this corridor. You get one contractor who can look at the driveway, the retaining wall, and the drainage behind it as a single system, not three separate bids.
Glen Sorrento, our owner, grew up watching hillside homes get built and rebuilt around Foster City’s lagoon edge, then spent more than two decades working through nearly every project type the Peninsula and Santa Cruz Mountains hand a contractor. That experience is why we stock OEM-source Tremron units where a color or profile run is still available, and why we’ll tell you when a repair should be base and drainage work instead of a teardown. Let’s figure out what the job actually needs – then we’ll talk materials.
Styles & brands we work with







Common Tremron Construction Problems We Solve in Felton
- Paver base failure on sloped lots after atmospheric-river rain. We see this all over Felton. Tremron pavers over a thin or under-compacted aggregate base shift and heave once winter rain soaks the subgrade, and once the field moves, joint sand goes with it.
- Efflorescence bloom and surface spalling on pavers and wall units. Felton’s wet-winter, dry-summer cycling pulls salts to the surface of Tremron concrete units, especially where drainage was never daylighted. The white chalky look isn’t a cosmetic flaw, it’s water moving through the block.
- Retaining wall settlement and bulging on wooded slopes. We’ve had to rebuild Tremron Mega-Bergerac walls that were stacked without geogrid or proper batter on steep, treed lots. Add saturated soil to a wall with no reinforcement and you’ll see the face start to lean within a few wet seasons.
- Joint sand washout and edge-restraint failure where runoff concentrates. On Felton driveways and patios cut into an uphill slope, runoff scours the paver field, pulls the joint sand, and bursts the edges. This isn’t a paver problem so much as a drainage and restraint problem.
- Freeze-stressed units with no base drainage. When water sits under Tremron pavers and the temperature swings, the trapped moisture deteriorates the units from underneath. A properly compacted base with a drainage path fixes this before the pavers themselves fail.
Tremron Service in Felton: What Local Conditions Mean for Your Equipment
Felton sits inside CAL FIRE’s very-high fire-severity WUI zone, which means hardscape and retaining work here rarely happens in isolation, a challenge our General Contractor in Felton manages on every project. A paver driveway or patio addition on a treed lot along Highway 9 or the San Lorenzo River corridor often triggers review alongside Chapter 7A ignition-resistant construction and defensible-space clearing. We plan Tremron paver and wall installs around the same slope-side grading and ember-zone setbacks that county reviewers flag, because missing that coordination stalls the permit and can force redesign after the fact. Flatland crews out of San Jose or Santa Cruz never have to think about this. In Felton, it’s baked into every job we quote.
One job comes to mind: on a steep, treed lot off Highway 9, a homeowner’s Tremron paver driveway had heaved and lost joint sand two winters in a row after runoff poured off the uphill slope. We pulled the field, rebuilt the base with proper depth and compaction, added a drainage swale and edge restraint to daylight the runoff, then reset the pavers with fresh polymeric sand. It has ridden out the last wet season without movement.
Tremron Models & Products We Service in Felton
We install and repair the Tremron Oldcastle interlocking paver line, Mega-Bergerac retaining wall block, the Belgard-type textured Stonegate series, and Tremron veneer and wall cap units. When a repair needs to tie into an existing run, we match OEM-source Tremron units where the color and profile are still available. Where performance matters more than a perfect match, we spec quality aftermarket polymeric joint sand and geogrid. On most paver and wall failures the honest fix is base, drainage, and restraint, not a full tear-out. Tear-out is the answer only when the subgrade is shot or the block is visibly failing.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in Felton
What you pay depends on access, slope, drainage work, and whether we’re repairing a field or replacing it. Steep Felton lots with narrow turnaround access add equipment and labor time, and if the subgrade is compromised, the base rebuild is the bulk of the cost. Here are the market-calibrated ranges we work within for this area:
| Tremron Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Every estimate is line-item and free. Call (833) 589-8103 and we’ll walk the site, check the base and drainage, and give you a written number that reflects what the job actually needs.
Serving Felton, CA — Our Local Coverage Area
We’re based in the Felton area and know this community well, with Tremron service in Mount Hermon and surrounding areas. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Tremron Construction in Felton
Yes, if the base and drainage are built for slope and runoff. The pavers themselves are not the weak point – it’s the base preparation, edge restraint, and where the water goes. On sloped lots we compact in lifts, add geogrid where the grade demands it, and daylight drainage so water doesn’t sit under the field. Call (833) 589-8103 for a site assessment and we’ll tell you whether your current base is worth salvaging or needs a rebuild.
Often, yes. Because Felton sits in CAL FIRE’s very-high fire-severity zone, hardscape and wall work on treed lots frequently gets reviewed alongside defensible-space requirements and ember-zone setbacks. We coordinate the hardscape plan with those reviews so the permit doesn’t stall. Call (833) 589-8103 and we’ll map out what your specific site is likely to trigger.
In most cases, yes. We match OEM-source Tremron units where the color and profile run is still in production, and reset the repaired section with proper base and edge restraint so it ties in clean. Full replacement is only the honest recommendation when the subgrade is shot or the field has moved beyond a stable repair. Call (833) 589-8103 and we’ll assess what can be salvaged.
The white chalk is efflorescence, salts pulled through the concrete by water moving behind the face. The leaning is backfill saturation and often missing geogrid or improper batter on a slope. Both are drainage and reinforcement problems, not a manufacturing defect in the block. We rebuild the wall with proper drainage and reinforcement so the cycle stops.
Paver driveway installation in Felton runs $7,000 to $18,000, and a paver patio sits between $3,500 and $11,000. Steep access, drainage improvements, or fire-zone coordination push you toward the higher end. Call (833) 589-8103 for an exact quote – estimates are free.
Service Areas Near Felton
We serve Felton and the surrounding Santa Cruz Mountains communities, including the full Felton service area, plus Tremron service in Lompico, Tremron service in Lexington Hills, and nearby mountain and valley towns like Ben Lomond and Mount Hermon. If you’re close, call and we’ll schedule a site walk.
Book Your Tremron Service in Felton Today
If your Tremron driveway, patio, or retaining wall is moving, washing out, or showing its age, call (833) 589-8103. We’ll walk the site, find the real problem, and give you a free, written estimate before any work starts.
Written by Glen Sorrento, Owner at Seaside Contractors, serving Felton and the Santa Cruz Mountains.