Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Lexington Hills, CA | Seaside Contractors
Seaside Contractors provides independent Unilock paver driveway, patio, and retaining wall installation across Lexington Hills, CA. The difference here comes down to site access and water: most Lexington Hills parcels sit on steep, wooded slopes where a paver truck can’t reach the pad, and winter runoff will find every weakness in your base course. We plan the job around those two realities before we ever talk paver color. Call (833) 589-8103 to schedule a free estimate, and we’ll walk the site with you first.
Why Lexington Hills Residents Choose Us for Unilock Service
Unilock makes a durable paver, but the paver is only as good as what’s underneath it. On Lexington Hills hillsides, that truth shows up faster than anywhere else in the county. We’re an independent installer, not an authorized Unilock dealer or factory rep, which means our recommendation is driven by your site conditions, not a sales quota.
Glen Sorrento, our owner, grew up watching hillside homes in Foster City get built and rebuilt, and he spent two decades working through project types that punished bad drainage and under-compacted bases. He’ll be the first to tell you that the base plan matters more than the paver. “Let’s figure out what the job actually needs, then we’ll talk materials.” That’s the approach on every Lexington Hills project. Our full Unilock sales & service capability means we stock edge restraints, joint sand, and base aggregate locally so a repair or rebuild doesn’t stall waiting on freight.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Lexington Hills
- Edge restraint failure and paver migration on steep driveways. Winter rain in the Santa Cruz Mountains scours the base course at the driveway edges. Without a concrete edge restraint instead of plastic snap edging, the outer course of pavers starts drifting downhill within a season or two. We pull the field, reset the restraint, and re-lay.
- Settling and ruts where a drive was laid over under-compacted base on a slope. Delivery trucks and fire-access vehicles load a steep drive far beyond a passenger car. If the subgrade wasn’t compacted in lifts, you’ll see wheel-path ruts appear after the first wet winter. We rebuild from the subgrade up.
- Joint sand washout and organic staining on shaded, wooded lots. Lexington Hills lots under redwood and cedar canopy stay damp. Runoff channels across the paver field, carrying the joint sand with it and leaving behind moss and leaf-tannin staining. We re-sand with a stabilized joint compound and correct the drainage pattern so the water stops crossing the field.
- Retaining wall bulging and tie-back failure where drainage was never daylighted. A Unilock Pisa2 or Brussels wall on a hillside holds back more than soil; it holds back hydrostatic pressure after heavy winter rain. If the wall’s drainage gravel and weep system were skipped, the wall starts to lean. We rebuild with daylighted drainage and geogrid reinforcement.
- Driveway apron washout at the cut. Where a private road meets the driveway, storm runoff from the one-lane lane can carve out the apron in one storm. We saw this on a job off Idylwild Road where the old asphalt apron heaved and washed out entirely, leaving the homeowner with a trench instead of a driveway entrance.
Unilock Service in Lexington Hills: What Local Conditions Mean for Your Equipment
Lexington Hills sits inside a wildland-urban interface, and that changes what a paver driveway is for. Ignition-resistant construction is the rule under WUI requirements, so a paver driveway here is often doing double duty as a noncombustible defensible-space surface and a fire-access lane. That means base depth and edge restraint get specified for apparatus weight, not just a passenger car. A fire engine loaded with water weighs far more than any delivery van, and if the base is thin, the drive will rut when it matters most. On a narrow private lane off Idylwild Road, our crew couldn’t get a loaded paver truck to the parcel, so we staged Unilock Brussels Block at the road and shuttled pallets up with a compact carrier. We excavated to a deeper compacted base, set a concrete edge restraint, and re-laid the drive on a slope that now sheds winter runoff instead of pooling it. The homeowner finally has a surface the fire department can actually use. That’s the standard every Lexington Hills Unilock drive should meet.
Unilock Models & Products We Service in Lexington Hills
We install and repair the full range of Unilock residential lines, but most Lexington Hills projects come down to a few workhorses. Unilock Brussels Block is our default for steep driveways because its dimensional tolerances hold tight under load. Unilock Beacon Hill Flagstone works for patios where a more irregular, natural-stone look fits the redwood-and-cedar architecture. Unilock Thornbury, a tumbled paver, gives a softer edge for walkways and smaller patios. And Unilock Pisa2 is the retaining wall system we recommend for hillside terracing because it interlocks cleanly and integrates with geogrid ties. When an existing Unilock field is sound, we lift, re-base, and re-lay the units rather than replace them. But a wall or drive with a failed base gets rebuilt, because patching over bad subgrade just moves the failure to next winter. We use Unilock’s own units, edge restraints, and matching cap and wall systems so color and dimensional tolerances stay consistent lot to lot.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Lexington Hills
What drives the cost on a Lexington Hills Unilock job is rarely the paver itself. It’s the site access, the base depth, and the drainage work. A flat suburban driveway might get away with a 4-inch compacted base; a steep Lexington Hills drive that doubles as a fire-access lane needs more. Here’s where pricing typically lands for the Santa Cruz Mountains market:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
A free estimate includes a site walk where we check access, drainage patterns, and existing subgrade. You’ll get a written line-item quote before any work. Call (833) 589-8103 to schedule yours.
Serving Lexington Hills, CA — Our Local Coverage Area
We’re based in the Lexington Hills area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Lexington Hills
Often not directly. Many Lexington Hills parcels sit on one-lane private roads where loaded paver trucks and concrete mixers can’t turn or climb. We plan for this from the start: staging materials at the road and shuttling pallets up with a compact carrier, or arranging a pump truck when needed. The access plan is part of the estimate, not an afterthought. Call (833) 589-8103 and we’ll assess your road before quoting.
Yes. A properly installed paver driveway is a noncombustible surface that contributes to defensible space under Santa Cruz County WUI requirements. But it has to be built for fire-access weight, which means deeper base and concrete edge restraint. Call (833) 589-8103 to have us check whether your existing drive meets that standard.
Daylighted drainage, a compacted base built in lifts, and edge restraint that holds under lateral water flow. On Lexington Hills slopes, we also grade the finished field to shed water away from the house rather than pooling it. Call (833) 589-8103 for a site-specific drainage assessment.
Most walls over 4 feet need a permit, and walls with surcharge loading from above probably need engineering. We’ll tell you during the estimate whether your wall triggers a permit, and if it does, we pull it and see the inspection through. Call (833) 589-8103 to discuss your wall height and location.
In most cases, yes. If the existing field is a current production line and we know the lot number, we can order matching units. If it’s an older discontinued line, we’ll sample the color and find the closest current equivalent. Call (833) 589-8103 and bring a photo of the existing pavers; we’ll take it from there.
Service Areas Near Lexington Hills
We serve Lexington Hills and the surrounding Santa Cruz Mountains and Pajaro Valley communities. You’ll find our Unilock crews working in Watsonville, Pajaro, Freedom, Interlaken, Las Lomas, and Amesti. If you’re nearby, we can usually reach you with the same team that works your neighbors’ properties. For more on our coverage, see the Lexington Hills service area page. We also run dedicated Unilock service in Ben Lomond and Bonny Doon.
Book Your Unilock Service in Lexington Hills Today
If your Unilock driveway is rutting, your retaining wall is leaning, or you’re planning a new paver patio before the rainy season, call (833) 589-8103. We’ll schedule a free site walk, check your access and drainage, and give you a written quote. Estimates are free and there’s no obligation.
Written by Glen Sorrento, Owner at Seaside Contractors, serving Lexington Hills and the Santa Cruz Mountains with Unilock hardscape installation and repair.