Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Redwood City, CA | Seaside Contractors
We provide independent Unilock paver installation, repair, and re-base work across Redwood City, from the 1920s bungalow lots downtown to the hillside custom homes in Emerald Lake Hills. The difference here is that we design for Redwood City’s saturated clay soils and steep lot drainage first, then we set the pavers. If your Unilock driveway or patio is heaving, creeping downhill, or trapping water, call (833) 589-8103 for a free estimate.
Why Redwood City Residents Choose Us for Unilock Service
Glen Sorrento, our owner, grew up in Foster City watching Peninsula homes get built and rebuilt, and he studied building construction technology at College of San Mateo before spending two-plus decades working through nearly every project type this side of the Bay throws at a contractor. That background matters when a Unilock driveway on a 94062 hillside lot starts creeping toward the street. We’re not a manufacturer-authorized dealer, and we don’t pretend to be. We’re an independent installer who works almost exclusively on Peninsula hardscape and exterior projects, and we bring our own engineered base designs to every job. As a Redwood City General Contractor, we also carry the full scope to handle what surrounds the hardscape: drainage, retaining walls, siding, roofing. One contractor, every trade.
For Redwood City paver work, we lean on Unilock sales & service expertise built over years of setting Brussels Block, Elegance, and Beacon Hill on the exact soils this city sits on. Same crew, same accountability, from excavation to final joint sand.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Redwood City
- Base washout under pavers on older flatland lots. On 94061 and 94063 bungalow properties, downspouts and surface runoff often concentrate into one low corner during winter storms. When the base wasn’t built with a proper cross-slope or geotextile separation, that corner washes out and the Unilock units drop with it.
- Edge-restraint failure on sloped driveways west of El Camino. Units creep downhill when the restraint isn’t pinned deep enough for the grade. We see this constantly in the 94062 hills, where driveways pitch hard toward the street.
- Efflorescence and moss on shaded patios. Redwood City’s concentrated winter rains plus dense base material and poor cross-slope keep moisture trapped under the surface. That white mineral deposit and slick green film are symptoms of drainage failure, not just surface dirt.
- Settlement at the apron transition. On older 94061 and 94063 lots, the junction between a new Unilock driveway apron and the existing concrete or cut-granite curb line settles unevenly because the subgrade wasn’t compacted uniformly on either side of the transition.
- Heaving from expansive clay. Redwood City’s hillside clays swell when saturated and shrink when dry. A shallow base on that soil will move seasonally, cracking joints and shifting units no matter how perfectly the pavers were laid on top.
Unilock Service in Redwood City: What Local Conditions Mean for Your Equipment
Redwood City’s downtown Specific Plan allows shorter setbacks and denser infill, and that has a direct impact on Unilock work here that flatland contractors from other cities miss. A paver driveway or patio on a downtown bungalow lot in 94061 or 94063 often has to fit within tight side yards and changed lot-coverage limits. You can’t just expand the hardscape footprint the way you might on a large estate lot with Woodside Unilock service or in Atherton, where coverage rules aren’t the constraint. That means we plan Unilock driveways in Redwood City to work harder within a smaller envelope: narrower paver bands, tighter turning radii, and drainage that directs water away from the foundation rather than toward the neighbor’s property line. The lot-coverage limit also pushes more homeowners toward permeable jointing systems and compact layouts that don’t sacrifice usable patio space. If you’re planning a Unilock driveway on a downtown Redwood City lot, the first question isn’t which paver color looks best. It’s what the city will let you cover, and what the drainage will do once you cover it.
Unilock Models & Products We Service in Redwood City
We set and repair Brussels Block, Elegance, and Beacon Hill lines, and we work with Techo-Bloc units for driveways and patios where the client wants a different aesthetic or budget point. When an existing Unilock hardscape has failed, we take a repair-first approach: lift the intact units, re-grade the base, reset them properly, and finish with quality joint sand. Full replacement only happens when the units themselves are cracked or the subgrade won’t drain even after correction. We use geotextile fabric, pinned edge restraint, and proper base material on every job, because cheap substitutes are what cause most of the failures we’re called to fix. For fast turnaround in Redwood City, we stock the common joint sands, edge restraints, and base materials locally, and we order Unilock units direct so you’re not waiting on a distributor’s slow season.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Redwood City
Paver work in Redwood City is priced by square footage, base depth, drainage complexity, and access. Hillside driveways in the 94062 corridor cost more than flat patio work because the base engineering and edge restraint requirements are heavier. Here’s what we currently quote for the three services most Redwood City homeowners call us about:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
Your free estimate includes an on-site look at the subgrade, drainage flow, and any permitting questions specific to your Redwood City lot. Call (833) 589-8103 and we’ll walk the property with you.
Serving Redwood City, CA — Our Local Coverage Area
We’re based in the Redwood City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Redwood City
Yes, in most cases. Redwood City requires permits for driveway replacements and any hardscape work that changes drainage patterns or lot coverage, especially within the downtown Specific Plan area. We pull the permits and handle the submittals. Call (833) 589-8103 and we’ll confirm what your specific lot triggers.
Expansive clay is the primary culprit. The soil swells when saturated by winter rain and shrinks during dry summers, and if the base under the pavers wasn’t engineered for that movement, the units shift, the edge restraint cracks, and the whole surface creeps downhill. The fix is a deeper, properly compacted base with geotextile and pinned edging on the downslope side. Call (833) 589-8103 for an on-site assessment.
Usually, yes. Unilock units are durable; it’s the base and edge restraint that fail most often. We lift the intact units, re-grade the base to proper cross-slope, install geotextile and new edging, then reset the original pavers and re-joint them. You only pay for full replacement if the units are cracked or the subgrade is beyond repair. Call (833) 589-8103 and we’ll tell you which camp your hardscape falls into.
Lot-coverage limits cap how much of your property can be impervious surface, which means a downtown Unilock driveway or patio often has to be narrower and more compact than what you’d build on a larger lot. We design within those limits using tighter layouts and permeable jointing where the city allows it, so you get the usable hardscape without the permit fight. Call (833) 589-8103 and we’ll check your lot’s coverage allowance.
Steep driveways need a deeper engineered base, geotextile separation, and edge restraint pinned deep enough to hold the units against gravity and downhill water flow. On a flat lot, you can get away with a standard base. On an Unilock in West Menlo Park or Emerald Hills grade, you can’t. We saw this firsthand on a 94062 property off a steep driveway near Emerald Hills: the existing paver drive had been laid on a shallow, non-engineered base, and the combination of expansive clay and runoff had pushed the units and cracked the edge restraint. We lifted the Brussels Block units, re-graded the base with geotextile and a pinned edging, reset the intact pavers, and finished with joint sand. Now the drive sheds water instead of heaving downhill. Call (833) 589-8103 for a free estimate on your slope.
Service Areas Near Redwood City
Beyond Redwood City, we run Unilock service into Redwood City service area neighborhoods and the surrounding Peninsula communities. We also regularly work in Unilock service in San Carlos and Unilock service in Redwood Shores, where waterfront fill lots and sloped grades present their own base and drainage challenges. If you’re a few minutes outside city limits, call and we’ll confirm coverage.
Book Your Unilock Service in Redwood City Today
If your Unilock driveway, patio, or walkway is showing signs of base failure, edge creep, or trapped moisture, don’t wait for the next winter storm to make it worse. Call (833) 589-8103 to schedule your free estimate. We’ll walk the lot, check the drainage, and give you a straight answer on what the job actually needs.
Written by Glen Sorrento, Owner at Seaside Contractors, serving Redwood City since the company’s founding.