Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Construction in Marin City, CA | Seaside Contractors
We provide independent Kohler installation, repair, and remodeling services across Marin City. Homeowners call us when a Kohler tub is rusting at the drain, a toilet won’t stop running, or a full bathroom remodel needs someone who actually knows the product lines and the county permitting process. What makes our Kohler work different here is simple: we understand Marin City’s fog-belt moisture and the unincorporated Marin County bureaucracy that governs every job. Call (833) 589-8103 for a free estimate.
As an independent contractor, not a Kohler-authorized dealer, we buy Kohler products through standard channels and stand behind our own workmanship. We’ve installed and repaired Kohler Wellworth toilets, Bellwether tubs, and Simplice kitchen faucets in aging Marin City homes for years. We know these products from the shelf, not from a plaque.
Why Marin City Residents Choose Us for Kohler Service
Most contractors in southern Marin treat a Kohler fixture as just another brand off the truck, unlike Kohler repair in Belvedere. We don’t. Glen Sorrento, our owner, grew up around construction in Foster City and spent two-plus decades working nearly every project type the area throws at a contractor. When a homeowner asks whether a cracked Bellwether cast-iron tub is worth refinishing or should be converted to a walk-in shower, Glen gives a straight answer based on what the product will actually do in a damp, coastal home.
The residential work in Marin City is different from what you see with Tiburon Kohler service or in Mill Valley. Here we’re mostly working in 1940s defense-housing originals and mid-century bungalows with tight bathrooms, old plumbing, and deferred maintenance. Kohler fixtures in these homes tend to fail in specific, predictable ways. That’s the work we know.
We use genuine Kohler OEM parts for valves, cartridges, flush assemblies, and drains. Aftermarket kits on Kohler toilets and faucets fail early, especially the tank hardware. We’d rather install the right part once than come back twice.
Styles & brands we work with







Common Kohler Construction Problems We Solve in Marin City
Here’s what we actually see on Kohler fixtures in Marin City homes, week after week:
- Rusted and chipped Bellwether cast-iron tubs. The fog that rolls in just north of the Golden Gate keeps bathrooms damp year-round. Older Kohler cast-iron tubs, particularly the Bellwether and Villager alcove models, develop enamel chipping and rust bleed at the drain and overflow. That rust stains tile and grout and eventually the tub leaks into the subfloor.
- Wellworth and Highline toilets that run constantly and sweat. Kohler’s two-piece gravity-flush toilets are reliable, but the fill and flush valves wear out. In Marin City’s cool, damp coastal air, the tanks also develop condensation, which drips onto the bathroom floor. Mineral scale from local water accelerates the problem compared to inland homes.
- Cracked cast-iron sink and tub rims. In older Marin City bungalows, decades of thermal cycling crack the cast iron at the rim or drain seat. The chip traps water and feeds mold in small bathrooms with poor ventilation, which is most of them here.
- Seized or scaled Kohler faucet cartridges. Hard water and sediment buildup seize the cartridges and aerators on Kohler pull-down and single-handle kitchen faucets. Cheap aftermarket cartridges leak within a year. We only install genuine Kohler replacements.
- Tub surrounds failing behind the wall. In Marin City’s fog-cooled climate, moisture gets behind aging tub surrounds and rots the framing. By the time a homeowner sees the tile crack or the grout failing, the damage is already done. We open the wall, assess the framing, and rebuild it properly.
Kohler Service in Marin City: What Local Conditions Mean for Your Equipment
Here’s something every Kohler owner in Marin City should understand: there is no Marin City building department. The community is unincorporated, so every permit, inspection, and code enforcement action runs through Marin County’s offices. For a bathroom or kitchen remodel that means a different review process, different paperwork, and on steep lots off Cole Drive and Donahue Street, frequently a drainage or geotechnical review before anything gets approved. That’s not a formality. We’ve had jobs where the hillside drainage plan took longer to clear than the actual rough-in plumbing.
What this means for a Kohler bathroom remodel in Marin City: we sequence the work around the county’s schedule, not ours. We pull the permit before demo begins. We coordinate the drainage review if the lot demands it. And we don’t let a tub-to-shower conversion stall at inspection because the county wants additional documentation on slope stability. Most contractors from outside southern Marin don’t expect this. We plan for it.
On a 1940s bungalow off Cole Drive, our crew tore out a rusted Kohler Bellwether cast-iron tub that had been leaking at the overflow for years. The alcove became a walk-in shower with new Kohler valve and trim, re-flashed wet wall, and proper waterproofing. The Marin County permit moved on schedule because we knew what the reviewers would ask for before we filed.
Kohler Models & Products We Service in Marin City
We work on the Kohler lines most common in Marin City homes: Wellworth and Highline two-piece toilets, Memoirs and Devonshire bathroom fixtures, Bellwether and Villager alcove bathtubs, Ceramic and Undermount kitchen sinks, and Simplice-style pull-down faucets. That list covers most of what was installed in mid-century southern Marin housing and what’s still being spec’d today.
Our parts approach keeps turnaround fast for Marin City homeowners. We stock common Kohler OEM fill valves, flush assemblies, cartridges, and drain components, so a toilet repair or faucet cartridge swap usually doesn’t wait on a parts order. For full fixture replacements, we order directly through our dealer channels and coordinate delivery around the county permit schedule.
When a Kohler cast-iron tub has cracked through the enamel, we’ll tell you straight: refinishing is a short-term patch, and in Marin City’s damp air, a patched tub keeps rusting from underneath. Better to convert to a walk-in shower or install a new alcove tub and solve the moisture problem at the source. That’s the honest conversation most homeowners want but don’t always get.
Our Kohler Construction Sub-Services
Within our broader general contracting scope, we focus on three Kohler-heavy service lines in Marin City:
- Tub-to-Shower Conversion: We replace aging Kohler Bellwether and Villager tubs with walk-in showers using genuine Kohler valves and trim. This is the highest-demand service we see in Marin City’s 1940s bungalows, where original tubs are failing and homeowners want a safer, drier bathroom.
- Walk-In Shower Installation: New accessible showers with proper waterproofing, Kohler drainage, and code-compliant framing. We handle the wet wall, the pan, and the permit.
- Full Bathroom Remodeling: Complete tear-outs and rebuilds with Kohler fixtures, Memoirs or Devonshire trim, and tile work that actually lasts in a fog-cooled environment. From the county permit to the final walkthrough, one team owns the job.
Glen Sorrento’s approach on any Kohler job: let’s figure out what the job actually needs, then we’ll talk materials. Some bathrooms need a full rebuild. Some just need a cartridge and a flush valve. We’ll give you the straight answer.
See the difference
Before
After
Before
After
Before
AfterKohler Service Pricing in Marin City
Here’s where our Kohler work typically lands for Marin City homeowners. These are realistic ranges for the housing stock and conditions here, not generic national averages:
| Service | Typical Marin City Price Range |
|---|---|
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
What drives the cost in Marin City specifically? Hillside access and drainage reviews, the age of the rough plumbing, and the extent of moisture damage behind old tub surrounds. A free estimate includes a site visit, a written line-item quote, and a permit assessment. Call (833) 589-8103 to schedule yours.
Serving Marin City, CA — Our Local Coverage Area
We’re based in the Marin City area and know this community well, with Sausalito Kohler service nearby. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Kohler Construction in Marin City
No. Kohler warranties cover the product, not the installer. An independent contractor can install Kohler fixtures without voiding the product warranty, as long as the product is purchased through legitimate channels and installed to code. What matters more is whether the contractor knows the product and pulls the right Marin County permits.
Unlike Kohler in Chinatown, Marin County issues all building permits for Marin City, since the community is unincorporated and has no city building department. For a Kohler bathroom remodel involving plumbing changes, you’ll need a county permit, and on hillside lots off Cole Drive or Donahue Street, a drainage or geotechnical review may be required before the permit clears. Call (833) 589-8103 and we’ll assess the permit path for your specific lot.
If the rust is surface-level and the enamel is mostly intact, a professional reglaze can buy you a few years. But in Marin City’s fog-belt moisture, a chipped cast-iron Kohler tub that’s rusting at the drain or overflow typically keeps rusting underneath the patch. Once water is getting through the enamel to the cast iron, the tub leaks into the subfloor and the repair won’t hold. We usually recommend replacing or converting to a walk-in shower. Call (833) 589-8103 for an honest assessment.
Marin City’s cool, damp coastal air causes Wellworth and Highline tanks to sweat when cold water sits in the tank and warm, humid bathroom air condenses on the exterior. The constant running usually points to a worn fill valve or flush valve flapper. We replace both with genuine Kohler OEM parts, and the sweating typically resolves once the valve stops leaking and the water level is adjusted correctly for our local conditions.
Yes, in most cases. Kohler Simplice-style pull-down faucets and single-handle kitchen faucets use replaceable cartridges. If the faucet body is in good condition, swapping the cartridge and aerator with genuine Kohler OEM parts restores full function for a fraction of replacement cost. If the body is scaled or corroded, replacement may be smarter. Call (833) 589-8103 and we’ll tell you which path makes sense.
Service Areas Near Marin City
Our Kohler service work extends across southern Marin and into the surrounding communities. We regularly serve Marin City homeowners along with properties in Sausalito, Mill Valley, Corte Madera, Larkspur, and Tam Valley. For homeowners further afield, we also offer Kohler service in Piñon Hills and Kohler service in Silver Lakes. If you’re planning a Kohler remodel and want one contractor handling it, reach out.
Book Your Kohler Service in Marin City Today
If your Kohler tub is rusting, your toilet won’t stop running, or you’re ready to convert that old alcove to a walk-in shower, we’ll walk the job with you and give you a straight price. We’re a full-scope general contractor, so Kohler sales & service fits inside the larger picture: fixtures, wet wall, tile, permits, and finish. Call (833) 589-8103 for a free estimate.
Written by Glen Sorrento, Owner at Seaside Contractors, serving Marin City and southern Marin.