Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in San Francisco, CA | Seaside Contractors
We provide independent CWS service across San Francisco, from cabinet refacing and repair to full kitchen remodels. We’re not a CWS dealer or authorized shop – we’re a general contractor that has installed and serviced CWS cabinetry in San Francisco’s Victorian and Edwardian rowhouses for over a decade. What makes our CWS work different here is simple: we know how these semi-custom lines perform in pre-1906 buildings with out-of-level walls, marine moisture, and DBI permit constraints. Call (833) 589-8103 for a free estimate.
Why San Francisco Residents Choose Us for CWS Service
CWS cabinetry shows up in a lot of San Francisco kitchens – Concord, Lancaster, Providence, and Hampton lines are common in homes from the Sunset to Bernal Heights. Glen Sorrento, our owner, grew up in Foster City’s Shell Cove and studied building construction technology at College of San Mateo before spending two-plus decades working through nearly every project type the Bay Area throws at a contractor. He’s seen enough CWS in Mission District and across San Francisco to know exactly where these cabinets fail and what’s worth repairing versus replacing. We don’t push full tear-outs when a reface or box swap makes more sense. That’s the difference.
Styles & brands we work with
Common CWS Construction Problems We Solve in San Francisco
- Door and drawer front delamination on Concord and Lancaster lines. The fog belt’s persistent marine humidity works its way into kitchens without adequate ventilation, especially in older San Francisco flats where exhaust fans are weak or nonexistent. The laminate starts peeling at the edges within a few years.
- Soft-close glide failure and hinge sag on Providence and Hampton cabinets. Most pre-1906 San Francisco floors have settled. Walls are rarely plumb. When CWS cabinets go in without careful shimming, the doors rub, reveals go wonky, and the soft-close hardware wears out fast.
- Box swelling and joint separation in base cabinets. Aging plumbing in San Francisco’s older housing stock means slow leaks under the sink are common. MDF and particleboard CWS boxes soak up that moisture and start separating at the joints. We see this constantly in the Richmond and Noe Valley.
- Finish cracking on painted CWS doors. South-facing kitchens in San Francisco get real UV exposure through original single-pane windows, even with the fog. Painted finishes crack and peel faster than homeowners expect.
- Out-of-square installs on hillside homes. Steep lots in Potrero Hill and Bernal Heights often mean floors pitched just enough to throw off cabinet level. Doors bind, drawers stick, and standard installation techniques don’t cut it.
CWS Service in San Francisco: What Local Conditions Mean for Your Equipment
Here’s something a generic CWS page won’t tell you: San Francisco’s Department of Building Inspection requires a discretionary permit for kitchen remodels that alter walls or add islands in pre-1906 buildings. The review timeline can stretch for months. That reality shapes how CWS work gets done here. In Noe Valley, Bernal Heights, and Potrero Hill, we regularly sequence CWS cabinet installation around permit approvals – or recommend refacing and like-for-like swaps that avoid triggering a full plan check entirely. Through our CWS service in Noe Valley, we took on a 1908 Edwardian kitchen on a steep street where the original CWS Concord cabinets had swollen boxes from a slow sink leak and doors that wouldn’t close flush because the floor had settled. We replaced the damaged base cabinets with new CWS boxes, upgraded to aftermarket soft-close glides, and rehung the upper doors after planing the frames. The layout stayed unchanged, which meant no full permit review. Job done, kitchen functional, no six-month DBI delay.
CWS Models & Products We Service in San Francisco
We work on all four major CWS lines: Concord, Lancaster, Providence, and Hampton. When replacement parts are needed, we source OEM CWS doors, drawer fronts, and hardware for exact color and profile matches. But we’re honest about parts availability – when OEM soft-close glides or hinges are backordered, we’ll recommend quality aftermarket upgrades that often outlast the originals. For San Francisco turnaround, we keep common aftermarket glides, hinges, and edge-banding stock on hand so we’re not waiting on a parts shipment from the East Coast. We assess each cabinet’s structural integrity before recommending anything. If frames are solid and moisture damage is localized, refacing or replacing individual boxes beats a full tear-out.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in San Francisco
What drives CWS service pricing in San Francisco? Scope, access, and the condition of existing boxes. A simple door replacement is one thing. Replacing water-damaged base cabinets in a third-floor walk-up with no elevator is another. Here’s what you can expect:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,720 – $15,340 |
| Countertop Installation | $2,360 – $7,670 |
| Backsplash Installation | $945 – $2,950 |
| Small Kitchen Remodel | $10,620 – $23,600 |
| Full Kitchen Remodel | $16,520 – $53,100 |
Every estimate is free and itemized. You’ll know the cost before we touch anything. Call (833) 589-8103 to schedule yours.
Serving San Francisco, CA — Our Local Coverage Area
We’re our General Contractor in San Francisco, based in the area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in San Francisco
Not if you’re doing a like-for-like swap or refacing existing boxes in the same layout. San Francisco’s DBI requires permits for changes to walls, plumbing, or electrical – adding an island, moving a sink, or altering load-bearing walls will trigger plan check. If you keep the layout unchanged, CWS cabinet replacement typically doesn’t need a permit. We’ll tell you upfront which category your project falls into. Call (833) 589-8103 and we’ll assess your kitchen in person.
Swelling and sticking CWS doors in Bernal Heights almost always come down to moisture. Fog belt humidity works into MDF and particleboard boxes, especially in kitchens with weak ventilation or a slow leak under the sink. In hillside homes, settled floors add to the problem – a cabinet installed level twenty years ago might not be level now. We diagnose the source before recommending repair or replacement. Call (833) 589-8103 for an inspection.
Yes. Refacing replaces doors, drawer fronts, and hardware while keeping the existing boxes in place. It’s faster than a full replacement, produces far less dust, and usually doesn’t require permits when the layout is unchanged. For rent-controlled or historic San Francisco buildings, refacing is often the cleanest option. Call (833) 589-8103 to find out if your cabinets are good refacing candidates.
If your building is a soft-story structure subject to the city’s mandatory retrofit program, your kitchen remodel may need to coordinate with structural work happening elsewhere in the building. That can affect timing, access, and sequencing. We coordinate with the building’s engineers and the DBI inspection schedule so your CWS installation isn’t delayed by surprises. Call (833) 589-8103 to discuss your building’s status.
Potrero Hill homes with rear decks often have kitchens on the back wall, which means exterior moisture against the shared wall can seep in over time. For CWS cabinets on that wall, we recommend sealing the exterior envelope first, then ensuring proper kitchen ventilation – a strong range hood or exhaust fan. Soft-close glides and hinges should be inspected annually in these conditions. Call (833) 589-8103 for an on-site evaluation.
Service Areas Near San Francisco
We serve San Francisco’s ZIP codes 94127, 94128, 94129, and 94130, including Noe Valley, Bernal Heights, Potrero Hill, and the Sunset. We also work with homeowners across the Bay Area through our San Francisco service area coverage and our independent CWS sales & service network. For more local detail, see our CWS service in Chinatown page or our CWS service in Sausalito page.
Book Your CWS Service in San Francisco Today
If your CWS cabinets need attention – whether it’s a stuck drawer in a Bernal Heights Edwardian or a full kitchen remodel in the Sunset – call (833) 589-8103 to schedule a free estimate. We’ll match the fix to the job and the material to the building. No pressure, no upselling. Just a straight answer on what your San Francisco kitchen actually needs.
Written by Glen Sorrento, Owner at Seaside Contractors, serving San Francisco and the Bay Area.